Abstract:CO2 geological sequestration (CGS) in depleted or high-water-cut oil reservoirs is a viable option for reducing anthropogenic CO2 emissions and enhancing oil recovery. The Upper Cretaceous Qingshankou Formation in the central Changling (fault) Depression, Songliao Basin, East China is the selected site for a pilot injection of the CO2 INJECTION project. The target reservoir depth is about 2400-2500 m. Lithologic features and diagenetic minerals of the reservoir and cap rocks have been investigated by optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD). In the Qingshankou Formation, the reservoir rock is a typical arkose with moderately to good sorting, and very fine to fine grain sizes. Minerallogically it is dominated by quartz (19-31 vol.%), plagioclase (19-28 vol.%), and K-feldspar (2-26 vol.%). Calcite and ankerite constitute the most common diagenetic minerals. The lithology of the cap rock is mainly silty mudstone and composed of quartz (average of 12.9-27.0 wt.%), albite (14.2-35.5 wt%), K-feldspar (1.3-2.7 wt.%), mixed-layer illite/smectite (24.9-68.8 wt.%), chlorite (3.15-14.7 wt.%) and some kaolinite. The main antigenic minerals in the CO2 INJECTION well are made up of albite (average of 29.7 wt.%), K-feldspar (average of 4.5 wt.%), calcite (average of 7.5 wt.%) and ankerite (average of 9.1 wt.%).To assess the long-term CO2 EOR-related fluid-rock interaction processes and evaluate the safety of CO2 geological storage in the Qingshankou Formation, reactive geochemical transport simulations using a simple 2D model were performed. The simulation results show that (1) the migration of free CO2 plume did not penetrate the low permeability cap rock after 800 years; (2) ankerite and dawsonite are the major sequestration minerals after CO2 injection, while albite, K-feldspar and calcite are the major dissolution minerals; (3) the sandstone permeability appears to have been reduced more significantly compared to porosity changes after CO2 injection; (4) 800 years after CO2 injection the amounts of CO2 trapped as residual free gas, dissolved gas and solid minerals are 10%, 74% and 16%, respectively; and (5) a dense carbonate crust is formed at the sandstone-mudstone boundary after CO2 injection, which can effectively retard the spread of CO2 into the cap rock. The results of our study provide basic geological information for CO2 trapping mechanisms in high-water-cut oil reservoirs, as well as a safety evaluation of CO2 geological storage resulting from massive injections of CO2 into reservoirs during EOR programs. (C) 2015 Elsevier Ltd. All rights reserved.

Modelling and Interpretation of a Temperature Drop in the Wellbore in Ordos CO2 Storage Project, China

Thermal Modeling of CO2 in the Injection Well and Reservoir at the Ordos CCS Demonstration Project, China

Modeling of possible CO2 leakage with phase transition in wellbore-reservoir system based on the Ordos CCS project, China

Phase transition and fluid backflow during the non-injection period in the Ordos CCS project, China

Thermal Modelling In And Around A Co2 Injector

The Sensitivity Analysis of Wellbore Heat Transfer During the Co2 Injection Process

Flow and Thermal Modeling of CO2 in Injection Well During Geological Sequestration

The Sensitivity Analysis of Wellbore Heat Transfer during the CO<sub>2</sub> Injection Process

Preliminary Environmental Risk Assessment Study Using US DOE’s National Risk Assessment Partnership on Leakage through Legacy Wells at the Shenhua CCS Demonstration Project

The Feasibility of Heat Extraction Using CO2 in the Carbonate Reservoir in Shandong Province, China

Modeling of CO2 transport and pressure buildup in reservoirs during CO2 storage in saline aquifers: a case in Dongying Depression in China

Impact of injection temperature and formation slope on CO2 storage capacity and form in the Ordos Basin, China

Analysis of CO2 phase transition within well-bore during injection into low-rank but relatively shallow coal seams

Numerical Modelling of CO2 Injection and Storage in Low Porosity and Low Permeability Saline Aquifers: A Design for the Permian Shiqianfeng Formation in the Yulin Area, Ordos Basin

Thermal recovery of coalbed methane: Modeling of heat and mass transfer in wellbores

Field-based simulation of a demonstration site for carbon dioxide sequestration in low-permeability saline aquifers in the Ordos Basin, China

Reactive transport modeling of long-term CO2 sequestration mechanisms at the Shenhua CCS demonstration project, China

Numerical investigation on wellbore temperature and pressure during carbon dioxide fracturing

Thermal Impact of Co2 Injection on Geomechanical Response at the Futuregen 2.0 Site: A Three-Dimensional Thermo-Geomechanical Approach

A modeling and numerical simulation study of enhanced CO2 sequestration into deep saline formation: a strategy towards climate change mitigation

Petrological Characterization and Reactive Transport Simulation of a High-Water-cut Oil Reservoir in the Southern Songliao Basin, Eastern China for CO2 Sequestration