Abstract:In the present work the rheological, thermo-mechanical, microstructural, and wetting characteristics of cement mortars with recycled expanded polystyrene (EPS) were analyzed. The samples were prepared after partial/total replacement of the conventional sand aggregate with EPS having different grain size and size distribution. Lightness and thermal insulation were relevant features for all the bare EPS composites, despite the mechanical strengths. Specifically, EPS based mortars were characterized by higher thermal insulation with respect to the sand reference due to the lower specific mass of the specimens mainly associated with the low density of the aggregates and also to the spaces at the EPS/cement paste interfaces. Interesting results in terms of low thermal conductivity and high mechanical resistances were obtained in the case of sand-EPS mixtures although characterized by only 50% in volume of the organic aggregate. Moreover, sand-based mortars showed hydrophilicity (low WCA) and high water penetration, whereas the presence of EPS in the cement composites led to a reduction of the absorption of water especially on the bulk of the composites. Specifically, mortars with EPS in the 2–4 mm and 4–6 mm bead size range showed the best results in term of hydrophobicity (high WCA) and no water penetration in the inner surface, due to low surface energy of the organic aggregate together with a good particle distribution. This was indicative of cohesion between the ligand and the polystyrene as observed in the microstructural detections. Such a property is likely to be correlated to the observed good workability of this type of mortar and to its low tendency to segregation compared to the other EPS containing specimens. These lightweight thermo-insulating composites can be considered environmentally sustainable materials because they are prepared with no pre-treated secondary raw materials and can be used for indoor applications.

Preparation of EPS-Based Thermal Insulation Mortar with Improved Thermal and Mechanical Properties

Experimental Studies on the Properties of EPS Thermal Insulating Mortar

Study on Improve Interface Tensile Adhesive Property of Extruded Polystyrene Board with Acrylate Emulsion

Preparation and Properties of Expanded Vermiculite/Gypsum Thermal Insulation Boards

Improving the thermal and mechanical performance of cement-based mortars for reinforcing masonry structures: computational and experimental methods

Development and application of inorganic-organic compound thermal insulating mortar

Optimizing the Composition Design of Cement-Based Expanded-Polystyrene (EPS) Exterior Wall Based on Thermal Insulation and Flame Retardance

Analysis on Influence of Different Forming Processes to EPS Thermal Insulation Mortar Performance

Mechanical Characterization of Polyacrylate Emulsion Modified Mortars

Recycled Expanded Polystyrene as Lightweight Aggregate for Environmentally Sustainable Cement Conglomerates

Preparative Techniques and Its Performance of Chemically Foamed Cement Paste

Polymer Modification Technology of Expanded Perlite and Polymer Thermal Insulation Mortar

Effects of Asphalt Emulsion Addition on the Performance of Polystyrene Grain Thermal Insulation Mortars

Development of Asphalt Emulsion-Polystyrene Grain Thermal Insulation Mortars

Novel preparation method and fire performance study of EPS composites based on calcium sulphate hemihydrate

Mechanical and thermal insulate behaviors of pultruded GFRP truss-core sandwich panels filled with EPS mortar

Enhancing Sustainability in Construction: Investigating the Thermal Advantages of Fly Ash-Coated Expanded Polystyrene Lightweight Concrete

Comparative Investigation on Asphalt Emulsion and Redispersible Polymer Powder for Preparation of Polystyrene Grain Thermal Insulation Mortars

Preparation of Adhesives from Recycled Expandable Polystyrene(EPS) Foams

Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template