Abstract:The applications of silica aerogels are restricted due to their intrinsic fragile property. Polymerization of di-isocyanates can be templated onto the mesoporous surface of the –NH2 group modified silica clusters, resulting in the conformal crosslinked coating on surface of silica clusters. Aminopropyltriethoxysilane (APTES), as the silica co-precursor and amine group modification agent, is involved containing tetramethyl orthosilicate (TMOS) silica precursor, while hexamethylene diisocyanate (HDI) is incorporated as the polymer crosslinking agent. The effects of different amounts of APTES on the physicochemical properties of the resulting crosslinked aerogels are investigated. The results show that the optimized APTES/TMOS volume ratio can be determined at 0.5:1. The resulting optimal crosslinked silica aerogel possesses large BET specific surface area of 150.9 m2/g, low thermal conductivity of 0.037 W/(m·K), and the Young's modulus is as large as 18 MPa under strain of 4.2%, much higher than that in the previously published works. The polymerization reaction mechanism forming the polyurethane chains has also been proposed. In addition, the interactions between silica clusters and polymer chains are studied by molecular mechanics and molecular dynamics. The interactions are mainly dependent on non-bonding energy, and the electrostatic energy has decisive impact on the combination of silica clusters and polymer chains. The density field of C, H, N, O, and Si elements overlaps with each other, indicating that the polymer crosslinked silica aerogel maintains typical three-dimensional porous structure. The N element enriches in the region between silica clusters, further verifying the formation –CONH–(CH2)6–CONH- polyurethane chains, which is actually responsible for the much enhanced mechanical property.

Mechanical and Thermal Properties of Reticulated SiC Aerogel Composite Prepared by Template Method

Microstructure Characterization and Thermal Performance of Reticulated SiC Skeleton Reinforced Silica Aerogel Composites

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Super Thermal Insulation SiC Aerogel with High Elasticity and Good Adsorption Performance Prepared by Constructing Coaxial Precursor

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Preparation of the Novel B4C–SiC Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Semi-template based, biomimetic-architectured, and mechanically robust ceramic nanofibrous aerogels for thermal insulation

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites

Mechanically Strong SiC Aerogels with Broadband Electromagnetic Wave Absorption Enabled by Hollow Skeleton and Interface Engineering

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

Microstructure And Thermal Insulation Property Of Silica Composite Aerogel

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Flexible SiC nanowire/mullite fiber composite aerogel with adjustable strength based on micromechanical design

High-temperature microtexture, microstructure evolution, and thermal insulation properties of porous Si3N4/silica aerogel composites produced by impregnation

3D‐Printed Mullite‐Reinforced SiC‐Based Aerogel Composites

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Studies on Thermal Property of Silica Aerogel/Epoxy Composite

Isocyanate-crosslinked silica aerogel monolith with low thermal conductivity and much enhanced mechanical properties: Fabrication and analysis of forming mechanisms

Flexible SiC nanowire aerogel with excellent thermal insulation properties

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

SiC whiskers‐reinforced polyimide aerogel composites with robust compressive properties and efficient thermal insulation performance