Abstract:A novel type of all-ceramic SiC aerogel was fabricated by freeze casting and carbothermal reduction reaction processes using graphene oxide (GO) doped SiC nanowires suspensions as starting materials. The effect of GO addition (0, 1, 2, and 4 mg/mL) on the porous morphologies, chemical composition, and the electromagnetic (EM) performance of the SiC aerogels were investigated. The optimum all-ceramic SiC aerogel exhibits effective whole X-band attenuation (>90%) at a fixed thickness of 3.3 mm from room temperature to 400 °C. It is ultralight with a density of 0.2 g/cm3 and possesses a low thermal conductivity of about 0.05 W/mK. The material composition remains stable at temperatures up to 800 °C. The lightweight, high thermal stability, low thermal conductivity, and excellent X-band attenuation performance at a fixed thin thickness make the all-ceramic SiC aerogels potential EM attenuation materials for many applications in harsh environments.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c23087.Figures of schematic diagram of test samples for block SiC aerogels, macro digital photo of SiC aerogel, SEM images of SiC ceramic aerogel by freeze casting, TEM images of SiC nanowire, SAED pattern, N2 adsorption and desorption isotherms, dielectric properties tested by the coaxial method, electromagnetic waves, impedance matching, and TGA characterization results (PDF)This article has not yet been cited by other publications.

Hierarchical SiC fiber aerogel toward microwave attenuation and thermal insulation application

Thermal insulated C/SiC nanofiber aerogel with high thermal stability and superior electromagnetic wave absorption performance

Multifunctional carbon nanofiber-SiC nanowire aerogel films with superior microwave absorbing performance

Flexible SiC nanowire aerogel with excellent thermal insulation properties

Multifunctional SiC aerogel reinforced with nanofibers and nanowires for high-efficiency electromagnetic wave absorption

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

Ultralight and compressive SiC nanowires aerogel for high-temperature thermal insulation

Hyperelastic and multifunctional SiC/SiO 2 composite aerogels with excellent mechanical, thermal insulation and electromagnetic wave absorbing properties

Ultralight and High-Strength SiC nw @SiC Foam with Highly Efficient Microwave Absorption and Heat Insulation Properties

Lightweight, Flexible, and Thermal Insulating Carbon/SiO2@CNTs Composite Aerogel for High‐Efficiency Microwave Absorption

Lightweight and thermally insulating polymer-derived SiBCN/SiC nw ceramic aerogel with enhanced electromagnetic wave absorbing performance

Scalable preparation of SiC@SiO2 nanocable aerogels for broadband microwave absorption using low-cost carbon source

Structural Engineering of Hierarchical Aerogels Comprised of Multi-dimensional Gradient Carbon Nanoarchitectures for Highly Efficient Microwave Absorption

Anisotropic and high-strength SiO2/cellulose nanofiber composite aerogel with thermal superinsulation and superhydrophobicity

All-Ceramic SiC Aerogel for Wide Temperature Range Electromagnetic Wave Attenuation

Significantly toughened SiC foams with enhanced microwave absorption via in situ growth of Si3N4 nanowires

Hierarchically structured cellulose aerogels with interconnected MXene networks and their enhanced microwave absorption properties

Design of ultralight and stable Ti 3 C 2 T x /SiCnw hybrid aerogel with hierarchical structure and heterogeneous interface for electromagnetic wave absorption

Hierarchically assembled carbon microtube@SiC nanowire/Ni nanoparticle aerogel for highly efficient electromagnetic wave absorption and multifunction

Microwave induced in-situ formation of SiC nanowires on SiCNO ceramic aerogels with excellent electromagnetic wave absorption performance