Abstract:This paper presents a new protection scheme for high-speed protection of transmission lines, the Integrated Positional Protection scheme. The concept of integrated protection is firstly introduced, in which a centralized protection relay provides the protection for multiple transmission lines. The proposed scheme is based on a specially integrated relay unit, which is installed at each substation of a network and responsible for the protection of all the line sections associated with the substation. The relay based on the detection and processing of fault generated high frequency transient current signals incorporates two novel protection principles and their application techniques, which are the positional protection techniques with and without the synchronization of Global Positioning System (GPS) respectively. The technique without the need for GPS synchronization is a non-unit protection technique, which does not require a communication link. The decision to operate is based on the detection of the relative arrival times of these high frequency components at the relay location as they propagate through the system. The basic principle of the GPS based technique is to detect the fault generated high frequency transient signals and record the time instant corresponding to when the initial travelling wave generated by the fault arriving at that busbar. A communication gateway is used to transmit and receive coded digital signals of the local information to and from the associated relay(s) in the system. At each substation, the relays determine the location of the fault by comparing the GPS time stamps measured locally with those received from the adjacent substations. Simulation studies of the scheme were carried out to examine the response to different power system and fault conditions. Results show that the scheme is insensitive to fault type, fault resistance, fault inception angle and system source configuration, and is able to offer both very high accuracy and - speed in fault detection.

Realization Schemes for Integrated Protection Based on Local Information Preventing Interlock Tripping

Self-adaptive Overload Protection Scheme Based on Local Information

Fast Control Strategy Generation Method Based on Local Information for Prevention of Intertripping

Solution to Avoid Unreasonable Action of Remote Backup Protection under Post-fault Overload Condition

Smart System Protection Based on Local Information

Research on system protection with local information to prevent power grid blackouts

Integrated Backup Protection Scheme In Smart Grids

A Multi-agent Technology Based Control Strategy to Prevent Cascading Trips in Large Power Grids

Analysis of Fault Dynamic Process Impact on Flow Transferring Identification

Modified Distance Backup Protection Fused with DC Control Information

Research on Local Backup Protection of Transformer and Substation Area Backup Protection

Study of Rreliability Mmodeling for Rrelay Pprotection Ssystem in Ddigital Ssubstations

A Reliable Accelerated Protection Scheme for Converter-Dominated Power Networks

Generator Tripping Strategy Based on Complex Network Theory

A Flexible Over-Frequency Generator Tripping Method Based On Power Flow Tracing

Implementation of Non-Communication Protection of Double Circuit Line Systems Based on Integrated Protection Platform

A Design of 220 Kv Line Protection Action Deduction System Based on Numerical Simulation

Scheme of Accelerated Overcurrent Protection for Distribution Systems with IDMT Coordination

A field scheme of feeder automation system based on non-communication protection

A centralized protection scheme based on combined positional protection techniques

An Adaptive Noncommunication Protection for Distribution Systems