Abstract:The inverter becomes an essential part in the distributed energy units, where an inductor-capacitor- inductor (LCL) filter is an up-to-date adoption for grid interfacing. However, the challenging issue of resonance related to the LCL-filter worsens the dynamic control characteristics and produces stability threat for the voltage source inverter system. The proper design of inverter control plays a substantial part in ensuring a steady state operation and a high quality of grid injected current according to grid connection codes. This paper offers a different design method of inverter control which alters the inner damping loop structure to enhance the damping and stability features of the inverter system. In the proposed solution, a modified compensator is employed through the LCL filter network and filter capacitor current feedback loop, the resultant augmented plant's output is then sent back at the reference point of a grid-connected inverter system to damp the unwanted resonance spike. This particular arrangement to form a damping loop is termed as parallel feedforward compensation. The damping loop is implemented by calculating the filter capacitor current, and a first order high-pass filter is employed as a damper in the suggested arrangement. Moreover, for comparative studies and analysis, the conventional filter capacitor current feedback active damping method is selected. In addition, the stability margins and control performance of the open current loop are examined under different filter parameters values. The substantial results of the suggested structure are quicker dynamic response, comparatively improved resonance damping, better tracking performance and higher delay compensation capability. A laboratory prototype is established to confirm the effectiveness of the suggested scheme on the bases of control performance and stability margins.(c) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

A novel LCL filter adopted in grid-connected inverter

Research on Splitting Capacitor and Repetitive Control for Grid-connected Inverter With LCL Filter

Design and analysis of an LCL circuit-based three-phase grid-connected inverter

Design of Digital Filter-based Highly Robust Active Damping for LCL-filtered Grid-tied Inverters

Mitigation of Grid-Current Distortion for LCL-Filtered Voltage-Source Inverter With Inverter-Current Feedback Control

LCL Filter Based on Three-Winding Transformer

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

A novel grid-connected converter with active power filtering function

Reconsideration of Grid-Friendly Low-Order Filter Enabled by Parallel Converters

Dual Current Feedback Active Damping for Improving Transient Performance of LCL-filter-based Grid-connected Inverter

Study of a new grid-connected LCL filter for shunt active power filter

Control strategies for the grid-connected inverter with LCL filter

Digital Low-Pass-Filter-Based Single-Loop Damping For Lcl-Filtered Grid-Tied Inverters

Robust Design of LCL-filters for Active Damping in Grid Converters

An Alternative Control Synthesis for Stability Enhancement of Digital-Controlled LCL-filtered Grid-Connected Inverter

Research on Grid-Connected Interleaved Inverter with L Filter

Application of Improved LCL Filter Topology in Active Power Filter

LCL-filter resonance suppression in grid-connected inverter based on strictly real positive plant strategy

A Novel Active Damping Method for LCL-filter-based Shunt Active Power Filter

A resonant damping control and analysis for LCL-type grid-connected inverter

Virtual Resistor Control Strategy of Parallel Active Power Filter with LCL Filter