Abstract:Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injection (SPI). To support ITER, a versatile SPI system was installed at the tokamak ASDEX Upgrade (AUG). The AUG SPI features three independent pellet generation cells and guide tubes, and each was equipped with different shatter heads for the 2022 experimental campaign. We dedicated over 200 plasma discharges to the study of SPI plasma termination, and in this manuscript report on the results of bolometry (total radiation) analysis. The amount of neon inside the pellets is the dominant factor determining the radiated energy fraction (frad). Large and fast fragments, produced by the $12.5^\circ$ rectangular shatter head, lead to somewhat higher values of frad compared to the $25^\circ$ circular or rectangular heads. This effect is strongest for neon content of $< 4\times10^{20}$ neon atoms injected, where a higher normal velocity component (larger fragments) seems slightly beneficial. While full-sized, 8 mm diameter, pure deuterium (D2) pellets lead to a disruption, the 4 mm or shortened 8 mm pellets of pure D2 did not lead to a disruption. The disruption threshold for pure D2 is found to be around $1\times10^{22}$ deuterium molecules inside the pellet. While the radiated energy fraction of non-disruptive SPI is below 20%, this is increased to 40% during the TQ and VDE phase of the disruptive injections. For deuterium-neon-mix pellets, frad values of $< 90$% are observed, and the curve saturates around 80% for 10% neon mixed into the 8 mm pellets ($2\times10^{21}$ neon atoms).

ITER DMS fast shutter development and laboratory testing

Fast Shutter optioneering study for the ITER Disruption Mitigation System

Concept Design of Fusion Power Shutdown System for ITER

Modifications to the JET Shattered Pellet Injector to Optimize Disruption Mitigation Experiments for Supporting ITER’s DMS Design

First results of Ne shattered pellet injection for mitigating plasma disruption with full metal wall in EAST tokamak

Plasma Shutdown System for Fusion Experimental Reactors

Modelling of shattered pellet injection experiments on the ASDEX Upgrade tokamak

Shattered pellet injection technology design and characterization for disruption mitigation experiments

Design of a Shattered Pellet Injector and Preliminary Bench Tests of Ne Pellet Formation for EAST Disruption Mitigation

Impact of breech geometry and propellant flow on the release of large pellets for the ITER disruption mitigation system

A description of the ITER's gas injection systems and current R&D activities

Optimal design and experimental testing of EMPI system for plasma disruption mitigation on J-TEXT

Interaction of SPI pellets with plasma on JET and associated disruptions

Characteristics of plasma disruption mitigation achieved by MGI and SPI on EAST

Effect of Two-Stage Shattered Pellet Injection on Tokamak Disruptions

Preliminary Experimental Results of Shattered Pellet Injection on the HL-2A Tokamak

Design of the shattered pellet injection system for ASDEX Upgrade

Non-linear shattered pellet injection modelling in ASDEX Upgrade

Radiated energy fraction of SPI-induced disruptions at ASDEX Upgrade

Simulation of DIII-D disruption with argon pellet injection and runaway electron beam

Runaway Electron Dynamics in ITER Disruptions with Shattered Pellet Injections