Abstract:The experimental results of low pressure supersonic molecular beam injection (SMBI) fuelling on the HL-2A closed divertor indicate that during the period of pulsed SMBI the power density convected at the target plate surfaces was 0.4 times of that before or after the beam injection. An empirical scaling law used for the SMBI penetration depth for the HL-2A plasma was obtained. The cluster jet injection (CJI) is a new fuelling method which is based on and developed from the experiments of SMBI in the HL-1M tokamak. The hydrogen clusters are produced at liquid nitrogen temperature in a supersonic adiabatic expansion of moderate backing pressure gases into vacuum through a Laval nozzle and are measured by Rayleigh scattering. The measurement results have shown that the averaged cluster size of as large as hundreds of atoms was found at the backing pressures of more than 0.1 MPa. Multifold diagnostics gave coincidental evidence that when there was hydrogen CJI in the HL-2A plasma, a great deal of particles from the jet were deposited at a terminal area rather than uniformly ablated along the injecting path. SMB with clusters, which are like micro-pellets, will be of benefit for deeper fuelling, and its injection behaviour was somewhat similar to that of pellet injection. Both the particle penetration depth and the fuelling efficiency of the CJI were distinctly better than that of the normal SMBI under similar discharge operation. During hydrogen CJI or high-pressure SMBI, a combination of collision and radiative stopping forced the runaway electrons to cool down to thermal velocity due to such a massive fuelling.

Preliminary Experimental Results of Shattered Pellet Injection on the HL-2A Tokamak

Plasma behaviour with hydrogen supersonic molecular beam and cluster jet injection in the HL-2A tokamak

Pellet Enhanced Performance on the Hl-2a Tokamak

Recent Experiment Results During Electron Cyclotron Heating On Hl-2a

1 EX / P 3-21 Plasma Behavior with Hydrogen Supersonic Molecular Beam and Cluster Jet Injection in the HL-2 A Tokamak

Overview of Hl-2a Experiment Results

Present Progress of Plasma Transport Study on HL-2A

Experimental study of injection depth and fuelling effects during supersonic molecular beam injection on the HL-2A tokamak

Observation of MBI and pellet injection penetration on HL-2A

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Overview of Experimental Results on the HL-2A Tokamak

OV / 4-3 1 Overview of Experimental Results on HL-2 A

The Development of Shattered Pellet Injector on HL-2A

First results of Ne shattered pellet injection for mitigating plasma disruption with full metal wall in EAST tokamak

Preliminary Experimental Results of Pellet Injection on the HL-2A Tokamak

Divertor Heat Flux Mitigation Using Supersonic Molecular Beam Injection in Type-Iii Elmy H Mode Plasmas of Hl-2a Tokamak

Design of a Shattered Pellet Injector and Preliminary Bench Tests of Ne Pellet Formation for EAST Disruption Mitigation

Thermal modeling of the multiple shattered pellet injection system for HL-3

Shattered pellet injection technology design and characterization for disruption mitigation experiments

Effect of Two-Stage Shattered Pellet Injection on Tokamak Disruptions

High performance experiments on high pressure supersonic molecular beam injection in the HL-1M tokamak