Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

Run-to-Run Control for Active Balancing of Lithium Iron Phosphate Battery Packs

Design and Control of Bidirectional Active Balancing Model for Lithium-Ion Battery Pack

Active Cell Balancing for Extended Operational Time of Lithium-Ion Battery Systems in Energy Storage Applications

Cell Balancing Control For Lithium-Ion Battery Packs: A Hierarchical Optimal Approach

Novel Active Battery Balancing Methodologies for Lithium Batteries: An Experimental Comparative Analysis

A fast active balancing strategy based on model predictive control for lithium-ion battery packs

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications

Active balancing system in battery management system for Lithium-ion battery

Optimizing Control for System-Wide State-of-Charge Balancing in Cascaded H-Bridge Battery Energy Storage Systems

Fast Model Predictive Control for Redistributive Lithium-Ion Battery Balancing

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

On‐line Equalization for Lithium Iron Phosphate Battery Packs Based on Voltage Threshold Integral

A Balancing Current Ratio Based State-of-Health Estimation Solution for Lithium-Ion Battery Pack

Hierarchical State-of-Charge Balancing and Second-Harmonic Current Suppressing Control with a Scalable DC Reconfigurable Battery Pack

Modular balancing strategy for lithium battery pack based on adaptive fuzzy logic control and energy path optimization

Leveraging adaptive model predictive controller for active cell balancing in Li-ion battery

Active Equalization for Lithium-Iron Battery Pack Based on Reduced-Order Solving Strategy for the Hanoi Tower Problem

An Intelligent Active Equalization Control Strategy Based on Deep Reinforcement Learning for Lithium-ion Battery Pack

An Optimal Strategy of Balancing for LiFePO4 Battery in Battery Energy Storage System

A Novel Balancing Strategy for Series-Connected Lithium Batteries Based on Mixed Charging Mode

An Active State of Charge Balancing Method With LC Energy Storage for Series Battery Pack