Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

Active balancing system in battery management system for Lithium-ion battery

A New Battery Management System for Li-Ion Battery Packs

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications

Characteristics of Battery Management Systems of Electric Vehicles with Consideration of the Active and Passive Cell Balancing Process

Active Cell Balancing of Lithium-ion Battery Pack Using Dual DC-DC Converter and Auxiliary Lead-acid Battery

Novel Active Battery Balancing Methodologies for Lithium Batteries: An Experimental Comparative Analysis

Development and Application of an Active Balancing System for Lithium-Ion Cells

Active Cell Balancing for Extended Operational Time of Lithium-Ion Battery Systems in Energy Storage Applications

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

Powering the Future: Advanced Battery Management Systems (BMS) for Electric Vehicles

Improved Battery Balancing Control Strategy for Reconfigurable Converter Systems

Novel active and passive balancing method-based battery management system design and implementation

Hierarchical Structure-Based Wireless Active Balancing System for Power Batteries

Cell Balancing for the Transportation Sector: Techniques, Challenges, and Future Research Directions

Optimizing Control for System-Wide State-of-Charge Balancing in Cascaded H-Bridge Battery Energy Storage Systems

Run-to-Run Control for Active Balancing of Lithium Iron Phosphate Battery Packs

Analysis of cell balancing of Li-ion batteries with dissipative and non-dissipative systems for electric vehicle applications

Lithium-Ion Battery SoC Equilibrium: An Artificial Potential Field-Based Method

Review of Cell-Balancing Schemes for Electric Vehicle Battery Management Systems

Battery Dynamic Balancing Method Based on Calculation of Cell Voltage Reference Value

Current Sensorless Microcontroller-Based Battery Management System with SOC and Active Cell Balancing