Abstract:The microstructural evolution and its consequence on the room and elevated temperature (500 °C) tensile properties of the Ti-6Al-2Sn-4Zr-2Mo-0.1Si (Ti6242S) alloy fabricated via the laser powder bed fusion were investigated after the following heat treatments: solution treatment followed by aging (STA), super-transus heat treatment, and water quenching (WQ) after annealing at a sub-transus temperature (885, 925, 954, and 982 °C) in the (α + β) regime. The super-transus heat treatment results in the removal of columnar prior β grains and formation of equiaxed grains that consist of α colonies. The WQ triggers the formation of a bimodal microstructure of α and α ́ phases, and the volume fraction of α ́ phase increases with increasing the WQ temperature. The STA process leads to a high yield strength (σy: ~658 MPa) and an elongation to fracture (εf: ~14.8%) when tested at 500 °C. The super-transus heat treatment results in a lower yield strength at both room and elevated temperatures due to coarsening of the α laths. The WQ process allows for the tailoring of the tensile property in a broad window, and the yield strength increased with increasing WQ temperatures. Particularly, the 885 and 925-WQ samples showed a remarkably enhanced strain hardening behavior during tensile tests. The 925-WQ samples exhibited a high σy of ~706 MPa and an εf of ~11.0% at elevated temperature. The samples that underwent STA processing and 925-WQ showed a higher σy while maintaining a decent ductility relative to the conventionally fabricated counterparts at 500 °C, indicating the potential elevated temperature applications for the Ti6242S alloy fabricated via laser powder bed fusion coupled with heat treatment.

Microstructure and Mechanical Properties at Elevated Temperature of Laser-Welded Ti–22Al–25Nb Alloy Sheets

Study on laser welding of a Ti-22Al-25Nb alloy: Microstructural evolution and high temperature brittle behavior

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

High-temperature Tensile Behavior of Laser Welded Ti-22Al-25Nb Joints at Different Temperatures

Microstructural investigations for laser welded joints of Ti–22Al–25Nb alloy sheets upon large deformation at elevated temperature

Microstructure and High-Temperature Tensile Properties of Ti3Al Alloys Laser Welding Joint

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructures and Properties of Laser Welded Ti2AlNb-Based Alloy Joints under Different Heat Treatment States

Embrittlement of Ti-23Al-17Nb alloy laser welded joint at 650°C

Bending Properties and Fracture Behavior of Ti-23Al-17Nb Alloy Laser Beam Welding Joints

A Comparative Study of Deformation Behaviors Between Laser-Welded Joints and Base Metal of Ti-22Al-24.5Nb-0.5Mo Alloy

Microstructure and Tensile Properties of Laser Beam Welded Ti–22Al–27Nb Alloys

In Situ Investigation of the Tensile Deformation of Laser Welded Ti2alnb Joints

Effect of Heat Input on the Microstructures and Mechanical Properties of Laser Welded Ti2AlNb Alloys

Microstructure and Mechanical Properties of Electron Beam Welded Joints of Ti 2 AlNb Alloy

Microstructure and High-Temperature Mechanical Properties of Laser Beam Welded TC4/TA15 Dissimilar Titanium Alloy Joints

Microstructures and Mechanical Properties of Ti–24Al–17Nb (at.%) Laser Beam Welding Joints

Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion

Effect of Thermal Exposure on Mechanical Properties in Welding Seam of TC11/Ti-22Al-25Nb Dual Alloy

Microstructure and High Temperature Mechanical Properties of Powder Metallurgical Ti-45Al-7Nb-0.3W Alloy Sheets

Effect of Temperatures on Mechanical Properties and Microstructure Evolution of Laser-Welded Ni-Base Superalloy