Abstract:The influence of heat input on the microstructural evolution of laser-welded Ti2AlNb joints was investigated in this study. The thermal cycles during welding process were analyzed by numerical simulation. In the heat affected zone (HAZ), the amount of α2 and O phases decreased with laser power increasing. During the heating period, α2 → B2 and O → B2 transformations occurred, but the decomposition of the B2 phase into α2 and O phases was suppressed during the cooling period. The heat transfer in the HAZ generated more equiaxed B2 grains, fewer LAGBs and a weaker {001}\(<\!\!1{\bar1}0\!\!>\) texture due to recovery, recrystallization and grain growth. The phase composition of the fusion zone remained single with only the B2 phase with the increase in heat input, but the mode of grain growth transformed from cellular growth into cellular dendritic growth. A finite element model was established to simulate the thermal cycles during the welding process. Higher heat input induced higher peak temperature, leading to higher temperatures in the HAZ for longer periods of time, which was beneficial for the α2 → B2 and O → B2 transformations. The calculated cooling rates in both the HAZ and in the fusion zone were faster than the critical cooling rate for B2 → α2 and B2 → O transformations.<h3 class="a-plus-plus">Graphic abstract</h3>

High-temperature Tensile Behavior of Laser Welded Ti-22Al-25Nb Joints at Different Temperatures

Microstructure and Mechanical Properties at Elevated Temperature of Laser-Welded Ti–22Al–25Nb Alloy Sheets

Study on laser welding of a Ti-22Al-25Nb alloy: Microstructural evolution and high temperature brittle behavior

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Embrittlement of Ti-23Al-17Nb alloy laser welded joint at 650°C

In Situ Investigation of the Tensile Deformation of Laser Welded Ti2alnb Joints

Microstructure and High-Temperature Tensile Properties of Ti3Al Alloys Laser Welding Joint

Heat treatment of laser-additive welded Ti2AlNb joints: Microstructure and tensile properties

Microstructures and Properties of Laser Welded Ti2AlNb-Based Alloy Joints under Different Heat Treatment States

Effect of Heat Input on the Microstructures and Mechanical Properties of Laser Welded Ti2AlNb Alloys

Microstructural investigations for laser welded joints of Ti–22Al–25Nb alloy sheets upon large deformation at elevated temperature

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructure Characterization and Thermal Stability of TC11/Ti2AlNb Joints During Thermal Exposure

Improvement in Microstructure and High-Temperature Brittleness of Laser-Welded Ti-22Al-25Nb Joints with the Addition of TiB2 Powder

A Comparative Study of Deformation Behaviors Between Laser-Welded Joints and Base Metal of Ti-22Al-24.5Nb-0.5Mo Alloy

Bending Properties and Fracture Behavior of Ti-23Al-17Nb Alloy Laser Beam Welding Joints

Microstructure Evolution and Tensile Properties of Laser-TIG Hybrid Welds of Ti 2 AlNb-Based Titanium Aluminide

Microstructure and Tensile Properties of Laser Beam Welded Ti–22Al–27Nb Alloys

Microstructure and High-Temperature Mechanical Properties of Laser Beam Welded TC4/TA15 Dissimilar Titanium Alloy Joints

Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion

Microstructural evolution and numerical simulation of laser-welded Ti2AlNb joints under different heat inputs