Abstract:Sb 2 Te 3 is an important thermoelectric material. Co is a potential diffusion barrier. This study examined the electroplated Co/Sb 2 Te 3 interfacial reactions at 300 °C, 400 °C and 500 °C. To provide fundamental information and for better understanding the reaction paths, the Co-Sb-Te phase equilibria isothermal sections at these three temperatures are proposed. No ternary compound is found. The 400 °C isothermal section contains (Co), (Sb), (Te), β-CoSb, β-Co 1−x Te, CoSb 3 , δ-(Sb 2 Te), γ-(SbTe), Sb 2 Te 3 and a continuous solid solution γ-Co(Sb,Te) 2 . At 500 °C, except for Te being molten, the phase relationships are similar to those at 400 °C. At 300 °C, although γ-CoSb 2 and γ-CoTe 2 have very significant mutual solubilities, they are two separate phases and do not form a continuous solid solution. In the Co/Sb 2 Te 3 couple reacted at 300 °C, only one reaction phase, γ-CoTe 2 with Sb solubility, is formed. Similar results are found in the Co/Sb 2 Te 3 couple reacted 400 °C, and the reaction phase is the continuous solid solution γ-Co(Sb,Te) 2 . Two reaction phases, β-Co 1-x Te and γ-Co(Sb,Te) 2 , are found in the couple reacted at 500 °C. The compositional ratio of Sb/Te in the reaction phase remained at 2/3 indicates that Co is the dominating diffusion species. The reaction phases are formed rapidly by Co penetration into the Sb 2 Te 3 substrate. A peculiar phenomenon was found with the reaction layer that formed on the side of Co that was not in direct contact with the Sb 2 Te 3 substrate which will be further investigated.

Co-In-Sb Ternary System (II): Isoplethal Section and Thermodynamic Modeling

Co-In-Sb Ternary System (I): Isothermal Sections and Liquidus Projection

The Co-Sb-Ga System: Isoplethal Section and Thermodynamic Modeling

Phase Diagram of In–Co–Sb System and Thermoelectric Properties of In-containing Skutterudites

Thermodynamic modeling of the Sb–Te system supported by DSC measurement and ab initio calculations

Phase boundary mapping for high thermoelectric performance β-Zn4Sb3 in Zn–In–Sb ternary system

Phase diagram of Bi–In–Se ternary system

Phase Diagrams of the Thermoelectric Bi-Sb-Se System

Phase Diagrams of Bi–Sb–Se–Te System

A Combinatorial Approach to Microstructure and Thermopower of Bulk Thermoelectric Materials: the Pseudo-Ternary PbTe–Ag2Te–Sb2Te3 System

Mid-temperature Thermoelectric Performance of Zone-Melted Sb2(Te,Se)3 Alloys Near Phase Transition Boundary

Co-Sb-Te Phase Equilibria and Co/Sb2Te3 Interfacial Reactions

Phase Diagram of Pb–Se–Te System I: Experimental Study

Liquidus Projection of the Ternary Bi-Sb-Te Thermoelectric Material System

Co-Sb-Te Phase Equilibria and Co/Sb 2 Te 3 Interfacial Reactions

Bi-In-Te Phase Diagram

Phase equilibria of Ag–Sb–Te thermoelectric materials

Enhanced Thermoelectric Performance in Ternary Skutterudite Co(Ge 0.5 Te 0.5 ) 3 via Band Engineering

Thermoelectric transport properties of p-type Bi2Se3–Sb2Se3–In2Se3 high entropy compounds

A review of CoSb3-based skutterudite thermoelectric materials

Enhanced thermoelectric properties of n-type CoSb3-based composites by incorporating In particles