Abstract:Bi2Te3-based materials are the most commonly used materials in commercial thermoelectric devices. There are many joints in thermoelectric devices, thus knowledge of interfacial reactions with Bi2Te3 substrate is important. Interfacial reactions are examined in the following couples, Sn/Bi2Te3 at 160 °C, In/Bi2Te3 at 140 °C and Cu/Bi2Te3 at 350 °C. The reaction temperatures are all lower than the melting points of the respective reaction substrates, so all these couples are solid/solid couples; however, liquation phenomena are observed in these couples. A reaction zone composed of two regions is formed in the Sn/Bi2Te3 couple reacted at 160 °C. The phase region adjacent to Sn is liquid phase and that adjacent to Bi2Te3 is SnTe with Bi solubility. The liquid phase is of near Bi-Sn eutectic composition and is formed due to alloying between Sn and Bi. The reaction path is Sn/liquid/SnTe/Bi2Te3. In the In/Bi2Te3 couple reacted at 140 °C, a liquid phase is formed among various reaction phases. The reaction path is In/In4Te3/liquid/Bi/(Bi2)m(Bi2Te3)n/Bi2Te3. Te atoms diffuse toward In and an In4Te3 phase is formed. Liquid phase is formed due to the alloying between In and remaining Bi. A metastable CuxBi2Te3, an oversaturated Bi2Te3 phase, is formed adjacent to the Bi2Te3 substrate in the Cu/Bi2Te3 couple reacted at 350 °C. The oversaturated phase decomposes, and a stable Cu2Te phase is formed. The remaining Bi adjacent to CuxBi2Te3 phase is molten at 350 °C, and the remaining Bi in contact with Cu, alloying with Cu and is also molten. Once the liquid phase is formed, the reaction rates become very fast. The reaction paths in the couples are illustrated with the proposed related phase equilibria isothermal sections.

Phase diagram of Bi–In–Se ternary system

Phase Diagrams of the Thermoelectric Bi-Sb-Se System

Phase Diagrams of Bi–Sb–Se–Te System

Bi-In-Te Phase Diagram

Phase Equilibria of the Sn-Bi-Te Ternary System

Phase Diagram of Pb–Se–Te System I: Experimental Study

Co-In-Sb Ternary System (I): Isothermal Sections and Liquidus Projection

Phase Equilibria of the Cu-Se-Te Ternary System

Liquidus Projections of Bi-Se-Ga and Bi-Se-Te Ternary Systems

Phase Equilibria of Binary Ag–Se and Ternary Ag–Pb–Se Systems

Thermodynamic Modeling of the Bi-Se and Bi-Te Binary Systems

Liquidus Projection of the Ternary Bi-Sb-Te Thermoelectric Material System

Phase Diagram of the Pb-Se-Sn System

Co/Bi2Se3 Interfacial Reactions and Bi-Co-Se Phase Equilibria

Phase Diagrams of the Ag–In–Se Photovoltaic Material System

Co-In-Sb Ternary System (II): Isoplethal Section and Thermodynamic Modeling

Liquidus Projection and Phase Equilibria Isothermal Section of Se–Sn–Te System

Mid-temperature Thermoelectric Performance of Zone-Melted Sb2(Te,Se)3 Alloys Near Phase Transition Boundary

Interfacial Reactions in In/Bi2Se3, In/Bi2Te3 and In/Bi2(Se0.2Te0.8)3 Couples

The Co-Sb-Ga System: Isoplethal Section and Thermodynamic Modeling

Liquation phenomena in Sn/Bi2Te3, In/Bi2Te3 and Cu/Bi2Te3 couples