Abstract:The tritium breeder materials used in solid tritium breeding blanket of fusion reactor are lithium-based ceramics, like lithium titanate (Li2TiO3), lithium orthosilicate (Li4SiO4), lithium aluminate（LiA1O2) and lithium zirconate (Li8ZrO6). Among them, Li2TiO3 has the advantages of stable chemical property, high mechanical strength and high lithium content, so it has become one of the preferred materials. Based on the design of solid blanket and tritium extraction process, breeder materials need to be made into a certain shape of pebbles. B Spherical breeder is widely used in the design of fusion reactor for the larger specific surface area, more channels between the pebbles to diffuse and release tritium, and easier loading or unloading. However, due to the high requirements of the breeder pebbles, the production control are not complete. In this paper, a new preparation method of ceramic pellets with high sphericity, polymer assisted sedimentation method, was used to prepare ceramic pebbles. The slurry consists of micro-scaled ceramic powder and organic monomers. Spherical droplets of ceramic slurry were obtained by sedimentation method in viscous liquids. The organic monomer contained in the droplets was heated to polymerize into small pellet preforms during the sedimentation process. By optimizing the sintering process, the fabricated pebbles could perform high compressive load (>18 N), spherical shape (0.95~1.02), uniform particle size (0.8~1.2mm) and porosity (15~20 %). The main advantages of this method is the mild preparation conditions (50~110 °C), the simplified transfer and purification process and convenient industrialization.. The obtained product has high spherical shape, uniform particle size, high compactness and mechanical strength.

Low-cost Fabrication of Li2TiO3 Tritium Breeding Ceramic Pebbles Via Low-Temperature Solid-State Precursor Method

Fabrication of Li2TiO3 Pebbles by Water-Based Sol–gel Method

Fabrication of the Li2tio3 Tritium Breeder Pebbles by A Capillary-Based Microfluidic Wet Process

Preparation of tritium breeding Li 2 TiO 3 ceramic pebbles via newly developed piezoelectric micro‐droplet jetting

Fabrication of fine‐grained Li2TiO3 ceramic with enhanced performance using high‐energy ball milling

Low-temperature synthesis of Li2TiO3 tritium breeder ceramic pebbles by water controlled-release solvothermal process

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Efficient fabrication of high strength Li2TiO3 ceramic pebbles via improved rolling ball method assisted by sesbania gum binder

Effects of High Li Content on the Crystal Structure and Properties of Li2+xTiO3 Ceramic Pebbles by Sol-Gel Method

Additive manufacturing of high-quality tritium breeding pebbles using ceramic precursors

A novel process for fully automatic mass-production of Li2TiO3 ceramic pebbles with uniform structure and size

Preparation of High Sphericity Li2TiO3 Tritium Breeder by Polymer Assisted Sedimentation Method

A simple approach to porous low-temperature-sintering BaTiO 3

Characterization of Li-rich Li2TiO3 ceramic pebbles prepared by rolling method sintered in air and vacuum

Tritium Release Performance of Biphasic Li2TiO3-Li4SiO4 Ceramic Pebbles Fabricated by Centrifugal Granulation Method

Alkaline hydrothermal treatment of P25 titanium dioxide for low temperature sintering of Li 2 TiO 3 tritium breeding ceramics

Preparation of Li 4 SiO 4 pebbles with high strength and inhibited lithium volatilization via lithium alginate

Recent Progress in Research of Solid Tritium Breeder Materials Li2TiO3: A Review

Grain growth mechanism and thermal stability of Li2TiO3 pebbles fabricated by wet method

Microfabrication of Li 4 SiO 4 pebbles with complex pore structure via digital light processing: Accuracy control and properties optimizing

Fabrication and characteristics of Li4SiO4 pebbles by a novel capillary-based microfluidic wet process