Abstract:In this paper, a mechanics-based phase-field model at the microscale is introduced for microstructure evolution during solidification. The couple phase-field model consists of Allen–Cahn equation for phase order parameter, Cahn–Hilliard equation for composition, heat conduction and elasticity equations. The introduced elastic energy allows for volumetric inelastic strains due to melting/solidification as well as a thermodynamically consistent solid-melt interface stress and consequently, residual stresses during solidification at the microscale and deformation can be captured. The computational microcell is considered at the melt-solid interface and the temperature as a time dependent function is used for its boundary conditions to solve the coupled phase-field model. Using COMSOL FE code, examples of columnar growth are studied. As result, the suppressive effect of elastic driving forces and the reduction in solidification rate, due to the volumetric inelastic strains, on solidification are revealed. The inelastic surface stress, concentrated inside the interface, can change the morphology of solidified structure but does not show a remarkable effect on the solidification rate. The thermal strain was included which reduced the effect of volumetric transformation strain and consequently, the internal stresses near constrained regions were decreased. The effect of undercooling was studied which showed that increasing the undercooling increased the temperature gradient in the vertical direction and near the interface and solidification rate and significantly changed the morphology of solidified structure, as a homogeneous growth was resolved for larger undercooling while a columnar growth was obtained for smaller undercooling. Solidification was studied under mechanical loading which showed external loading changes the stress distribution and magnitude and the morphology of solidified structure. Effect of an inclusion on solidification was also investigated. The inclusion represented a more homogeneous distribution of stress and temperature with different magnitudes compared to the rest of the sample, creating a directional solidification toward the inclusion.

High-throughput Thermodynamic Calculations of Phase Equilibria in Solidified 6016 Al-alloys

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Thermodynamics‐Guided High‐Throughput Discovery of Eutectic High‐Entropy Alloys for Rapid Solidification

Thermodynamic Investigation of New High-Strength Low-Alloy Steels with Heusler Phase Strengthening for Welding and Additive Manufacturing: High-Throughput CALPHAD Calculations and Key Experiments for Database Verification

Thermodynamic Calculations of Solidification and Phases Precipitation Behavior of Ni-Fe Based Superalloys for Ultra-supercritical Power Plants

Thermodynamic Description and Simulation of Solidification Microstructure in the Co-Ti System

Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation During Directional Solidification

Thermodynamic Calculation of Al-Cu Eutectic Alloy with Microstructure Simulation Using Phase Field Method

Development and Applications of a Thermodynamic Database for Multicomponent Cu Alloys

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy

Thermodynamic calculation of high zinc-containing Al-Zn-Mg-Cu alloy

Calculation of Flow, Heat Transfer and Evaporation During the Electron Beam Cold Hearth Melting of Ti-6Al-4V Alloy

Phase Equilibria in the Al–Co–Cr–Fe–Ni High Entropy Alloy System: Thermodynamic Description and Experimental Study

A thermochemical database from high-throughput first-principles calculations and its application to analyzing phase evolution in AM-fabricated IN718

Solidification Behavior of Dy-Tb-Fe Alloys through Experimental Study and Thermodynamic Calculation

Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys

A Mechanics-Based Phase-Field Model and Finite Element Simulations for Microstructure Evolution during Solidification of Ti-6Al-4V

Calculation of Phase Diagrams and Solidification Paths of Al-rich Al−Li−Cu Alloys

Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

Exploration of Solid Solutions and the Strengthening of Aluminum Substrates by Alloying Atoms: Machine Learning Accelerated Density Functional Theory Calculations