Abstract:Quinary phase-field model was extended and constructed, and the diffusion-controlled phase decomposition and morphology in thermal aging Fe–Cu–Mn–Ni–Al quinary system coupled with CALPHAD thermodynamic databases were successfully studied. The effects of Manganese composition on the morphology, volume fraction, number density, particles size and growth and coarsening of Cu-rich precipitates were investigated systematically. The simulation results showed that Cu-rich α phase was firstly formed, and the Ni, Al and Mn atoms were partitioned to the Cu-rich phase, leading to the formation of a Ni–Al–Mn-rich intermetallic ring/Cu-rich core precipitate morphology and final conversion of Cu-rich phase to Cu-rich γ phase. The curves of volume fraction and free energy variation with simulation time indicated that Mn element can promote nucleation driving force to overcome the nucleation barrier in initial stage and can also accelerate the precipitation of Cu-rich phase and promote the growth and coarsening processes. Through the analysis of number density (ND) and average particle size (APS), we found that the values of ND and APS of Cu-rich particles increase with the rising of Mn content, which indicates that the higher Mn content will boost the nucleation and growth rate. Moreover, the time exponent at the later precipitation was 0.41, 0.42 and 0.37, respectively, which had deviations with the 0.33 of the LSW’s value, and the growth and coarsening of Cu-rich precipitates were under the mixed mechanisms of Ostwald ripening and coalescence coarsening of neighboring precipitates. These results provided useful information for the preparation of multi-component alloyed steel with excellent mechanical properties to some extent.

Thermodynamic Calculation of Al-Cu Eutectic Alloy with Microstructure Simulation Using Phase Field Method

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation During Directional Solidification

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Phase Field Simulation of Liquid-Solid-eutectoid Multiple Phase Transformations of a Fe-C Binary Alloy

Phase-Field Simulation of Microsegregation and Dendritic Growth During Solidification of Hypoeutectic Al-Cu alloys

Phase-field-lattice Boltzmann Study for Lamellar Eutectic Growth in a Natural Convection Melt

Phase-Field Simulation of Lamellar Growth for A Binary Eutectic Alloy

Phase-field Simulation of Phase Separation Coupled with Thermodynamic Databases in FeNiCrCoCu High-Entropy Alloys

Microstructures simulation of magnesium-based alloys during solidification by phase-field method

Phase-Field Simulation of the Microstructure Evolution in the Eutectic Alloy NiAl-31Cr-3Mo

Simulation of Isothermal Solidification of Ternary Alloy with Phase-Field Model

Phase-field simulation of isothermal solidification of binary alloy based on KKS model

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

Prediction of the Solidification Path of Al-4.37cu-27.02mg Ternary Eutectic Alloy with A Unified Microsegregation Model Coupled with Thermo-Calc

Study of Θ’ Precipitation Behavior in Al-Cu-Cd Alloys by Phase-Field Modeling

Microstructure Simulation of Aluminum Alloy Casting Using Phase Field Method

Calculation of Free Energy of Al-Cu-Li Alloy under Electric Field

Phase-field modeling of microstructure evolution of Cu-rich phase in Fe–Cu–Mn–Ni–Al quinary system coupled with thermodynamic databases