Sub-nє Static Resolution Fiber Laser Sensor

Shuangxiang Zhao,Qingwen Liu,Jiageng Chen,Zuyuan He

DOI: https://doi.org/10.1364/cleo_at.2019.af1k.2

2019-01-01

Abstract:A fiber laser sensor system capable of both static and dynamic strain measurement is presented. Using Pound-Drever-Hall and injection-locking techniques, resolution of 276 pє in 1000 s and 450 fє at 1 kHz is demonstrated. © 2019 The Author(s)

What problem does this paper attempt to address?

Sub-N Epsilon Static Resolution Fiber Laser Sensor

Shuangxiang Zhao,Qingwen Liu,Jiageng Chen,Zuyuan He

2019-01-01

Abstract:A fiber laser sensor system capable of both static and dynamic strain measurement is presented. Using Pound-Drever-Hall and injection-locking techniques, resolution of 276 p epsilon in 1000 s and 450 f epsilon at l kHz is demonstrated. (C) 2019 The Author(s)
Realization of sub-nano-strain static resolution with injection-locking between two fiber laser sensors

Shuangxiang Zhao,Qingwen Liu,Jiageng Chen,Zuyuan He

DOI: https://doi.org/10.1109/JLT.2019.2912171

IF: 4.7

2019-01-01

Journal of Lightwave Technology

Abstract:Fiber Bragg grating (FBG) based sensors have achieved great performance in dynamic strain sensing, while static strain measurement is still very challenging because it requires extra reference for temperature compensation. In this paper, a high-resolution FBG laser sensor system is presented, which is capable of both static and dynamic strain measurements. In the proposed sensor, a distributed fee...
An Ultra-High-resolution Large-Dynamic-range Fiber Optic Static Strain Sensor Using Pound-Drever-Hall Technique

Qingwen Liu,Tomochika Tokunaga,Zuyuan He

DOI: https://doi.org/10.1364/ol.36.004044

2011-01-01

Abstract:In this paper we report the realization of a fiber optic static strain sensor with ultra-high resolution and large dynamic range for the applications of geophysical research. The sensor consists of a pair of fiber Bragg grating based Fabry-Perot interferometers for strain sensing and reference, respectively. Pound-Drever-Hall technique is employed to interrogate the sensor heads, and a cross-correlation algorithm is used to figure out the strain information with high precision. Static strain resolution down to 4.5 nε was demonstrated. The dynamic range can be extended up to hundreds of με, and the measuring period is a few tens of seconds.
0.1-Nano-strain Resolution Fiber Optic Sensor for Quasi-Static Strain Measurement with 1 Ks/s Sampling Rate

Jiageng Chen,Qingwen Liu,Xinyu Fan,Lin Ma,Jiangbing Du,Tomochik Tokunaga,Zuyuan He

DOI: https://doi.org/10.1117/12.2194700

2015-01-01

Abstract:We present a newly developed high performance fiber optics sensor for quasi-static strain measurement. The sensor consists of a piece of π-phase shifted FBG for static strain sensing, and fiber Fabry-Perot interferometer for reference, interrogated by an improved sideband interrogation method with real-time feedback loops. Strain resolution of 0.12 nano-strain was achieved with sampling rate up to 1 kS/s in laboratory experiments. Compared with previous sensor systems, the proposed method shows great improvement in the sensing rate as well as the resolution.
A Dynamic Strain Sensor System Based on a Tunable Fiber Ring Laser

LI Jian-zhong,RAO Yun-jiang,RAN Zeng-ling

DOI: https://doi.org/10.3321/j.issn:1005-0086.2008.02.002

2008-01-01

Abstract:An in-fiber Bragg grating(FBG) sensing system with a high signal to noise ratio (SNR) of ～65 dB is proposed for the dynamic strain measurement,which is based on a tunable fiber ring laser configuration. The sensing signals of the FBGs are demodulated by using an imbalanced Mach-Zehnder interferometer (MZI) that combines with a tunable filter.Experimental results show that an excellent electrical SNR of 52dB is achieved for a FBG sensor located at 2km on the fiber link with a low pump laser power of only 100 mW,which leads to a strain resolution of 6.7×10-12/Hz1/2.
Ultrahigh resolution optical fiber strain sensor using dual Pound-Drever-Hall feedback loops.

Jiageng Chen,Qingwen Liu,Xinyu Fan,Zuyuan He

DOI: https://doi.org/10.1364/OL.41.001066

IF: 3.6

2016-01-01

Optics Letters

Abstract:We present an ultrahigh resolution optical fiber strain sensor with a broad frequency range from quasi-static to several hundred hertz. The sensor consists of a pi-phase shifted fiber Bragg grating for strain sensing and a fiber Fabry-Perot interferometer as reference. The laser carrier and sideband are locked to the reference and sensing elements, respectively, via two individual feedback loops, in which the Pound-Drever-Hall technique is employed to generate the error signals. The sampling rate is up to 500 samples/s in the demonstrational experiments, only limited by the updating rate of the frequency counter. The strain resolution exhibits a 1/f characteristic in the bandwidth of 0.01-250 Hz, and is better than 0.01 ne at 10 Hz with a dynamic range up to 149 dB. Compared with the traditional static strain sensors, the proposed sensor shows a great improvement in both resolution and sensing bandwidth, and can be a powerful tool for geophysical applications. (C) 2016 Optical Society of America
High Resolution Optical Fiber Sensor for Quasi-Static Strain Measurement by Strain-Temperature Discrimination

Jiageng Chen,Qingwen Liu,Xinyu Fan,Zuyuan He

DOI: https://doi.org/10.1364/cleo_at.2017.aw1b.3

2017-01-01

Abstract:A high resolution quasi-static strain sensor based on a novel scheme for strain and temperature discrimination has been developed. Within 16000s measurement, resolutions of 0.025 mu e in strain and 0.0019 degrees C in temperature are achieved.
Sub-nano resolution fiber-optic static strain sensor using a sideband interrogation technique.

Qingwen Liu,Tomochika Tokunaga,Zuyuan He

DOI: https://doi.org/10.1364/OL.37.000434

IF: 3.6

2012-01-01

Optics Letters

Abstract:We propose a novel sideband interrogation technique with multiplex radio frequency intensity and phase modulation to measure the resonance frequency difference between two optical resonators. Based on this new technique, an ultrahighly sensitive fiber-optic static strain sensor system consisting of a pair of identical fiber Fabry-Perot interferometers is built by incorporating a cross-correlation data processing algorithm. A static strain resolution down to 0.8 ne is demonstrated experimentally, which makes the sensor system a useful tool for geophysical research applications. (C) 2012 Optical Society of America
Sub-Nano Resolution Static Strain Fiber Sensor Using A Novel Sideband Interrogation Technique

Qingwen Liu,Zuyuan He,Tomochika Tokunaga,Kazuo Hotate

DOI: https://doi.org/10.1109/PHO.2011.6110863

2011-01-01

Abstract:A novel sideband interrogation technique was proposed to measure the resonance difference between two Fabry-Perot interferometers. With this technique sub-nano static strain-resolution was demonstrated experimentally for the first time to the best of our knowledge.
Sub-Nano-Strain Multiplexed Fiber Optic Sensor Array for Quasi-Static Strain Measurement

Jiageng Chen,Qingwen Liu,Xinyu Fan,Zuyuan He

DOI: https://doi.org/10.1109/lpt.2016.2592506

IF: 2.6

2016-01-01

IEEE Photonics Technology Letters

Abstract:This letter presents a high resolution multiplexed strain sensor for quasi-static strain measurement based on π-phase-shifted fiber Bragg gratings (π-PSFBGs). The sensor array is composed by four π-PSFBGs in parallel with different delay lines, and a time-division multiplexing scheme is proposed to interrogate the π-PSFBGs in turn. The Pound-Drever-Hall technique and the sideband interrogation method are employed to improve the resolution and the sampling rate. In the demonstrational experiment, three-channel quasi-static strain sensing is realized with a resolution better than 0.4 n and a sampling rate of 100 samples/s.
Multiplexed Sub-Nano Resolution Quasi-Static Strain Sensor Based on Transient Response of Fabry-Perot Interferometers

Jiageng Chen,Qingwen Liu,Zuyuan He

DOI: https://doi.org/10.1117/12.2267101

2017-01-01

Abstract:We present a multiplexed quasi-static strain sensor with sub-nano resolution using fiber Fabry-Perot interferometers (FFPIs). The FFPIs are connected in ladder structure with cascaded couplers and delay fibers for multiplexing, and their transient response excited by laser pulses are acquired to distinguish the resonant frequencies of each FFPI. An electro-optical system based on acousto-optic modulator is employed to interrogate the sensor array. In the demonstrational experiment, 3-channel strain measurement with resolutions better than 0.2 n epsilon/Hz(1/2) in frequency band from 0.1 Hz to 100 Hz is realized.
Realization of Nano Static Strain Sensing with Fiber Bragg Gratings Interrogated by Narrow Linewidth Tunable Lasers

Qingwen Liu,Tomochika Tokunaga,Zuyuan He

DOI: https://doi.org/10.1364/oe.19.020214

IF: 3.8

2011-01-01

Optics Express

Abstract:Aiming at realizing a static strain sensor of nano-strain resolution, which is required in most geophysical applications, this paper presents a thorough analysis on the strain resolution of a fiber Bragg grating (FBG) static strain sensor interrogated with a narrow linewidth tunable laser. The main noise sources of the sensor are discussed, and the strain resolution is deduced with a cross-correlation algorithm. The theoretical prediction agrees well with our experimental result, and the analysis is further validated by numerical simulations. Based on the analysis, the paper provides the guidelines for optimizing this type of sensor to realize ultra-high resolution. It is shown that with properly designed FBGs and interrogation systems, nano static strain resolution can be realized, as we recently demonstrated in experiment.
Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

Wei-sheng Liu,Daru Chen,M. Jiang,Sailing He

DOI: https://doi.org/10.1364/AOE.2008.SUC1

2008-10-30

Abstract:A high resolution strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity and a wavelength-swept single-longitudinal-mode laser diode is demonstrated. Wavelength demodulation is achieved by mapping wavelength measurement to time measurement.

Physics,Engineering,Materials Science
Resonant Fiber-Optic Strain and Temperature Sensor Achieving Thermal-Noise-limit Resolution

Shuangxiang Zhao,Qingwen Liu,Jiageng Chen,Zuyuan He

DOI: https://doi.org/10.1364/oe.415611

IF: 3.8

2021-01-01

Optics Express

Abstract:In the area of fiber-optic sensors (FOSs), the past decade witnessed great efforts to challenge the thermal-noise-level sensing resolution for passive FOS. Several attempts were reported claiming the arrival of thermal-noise-level resolution, while the realization of thermal-noise-level resolution for passive FOSs is still controversial and challenging. In this paper, an ultrahigh-resolution FOS system is presented with a sensing resolution better than existing high-resolution passive FOSs. A fiber Fabry-Perot interferometer as the sensing element is interrogated with an ultra-stable probe laser by using the Pound-Drever-Hall technique. Both strain and temperature measurements are carried out to validate the performance of the sensor. The measured noise floor agrees with the theoretical thermal noise level very well.
Multilongitudinal Mode Fiber Laser for Strain Measurement

Shengchun Liu,Zuowei Yin,Liang Zhang,Liang Gao,Xiangfei Chen,Jianchun Cheng

DOI: https://doi.org/10.1364/ol.35.000835

IF: 3.6

2010-01-01

Optics Letters

Abstract:A multilongitudinal mode fiber laser sensor formed by two fiber Bragg gratings and a piece of erbium-doped fiber is first proposed and validated experimentally. When the strain is applied on the sensor, the laser cavity is stretched, which leads to a change of round-trip frequency. Thus the strain can be obtained by measuring the beat frequency of the resonant cavity. The proposed sensor is found to be characterized with simplicity, easy setup, high resolution, low-cost demodulation, and good stability. Experimental results show that the sensor has a sensitivity of -1.1 KHz/microepsilon and the root-mean-square deviation of 3.6 microepsilon.
A mode-locked fibre laser temperature independent strain sensor based on intracavity pulse interference

Hani J. Kbashi,Brian B. Sheil,Auro M. Perego

DOI: https://doi.org/10.1016/j.optlaseng.2024.108040

IF: 5.666

2024-02-04

Optics and Lasers in Engineering

Abstract:High resolution, accurate strain sensors find vital applications in civil, aerospace, and mechanical engineering. Photonic solutions, especially fibre Bragg gratings, despite being promising platforms for strain sensing in harsh environments, and achieving microstrain resolution, suffer from strong sensitivity to temperature fluctuations and require expensive optical detection methods. To tackle these challenges, in this work we present a mode-locked fibre laser strain sensor based on intracavity pulse interference. Our all-fibre sensor, using an intracavity Mach-Zehnder interferometer architecture achieves 20 microstrain resolution with linear response over a 4 millistrain range. Our proposed sensor does not require external locking, and it is environmentally stable, decoupling temperature and strain effects. Furthermore, through a full electronic read-out in radio-frequency domain, our solution can bypass expensive and bulky optical detection. These features pave the way for low-cost and robust photonic strain sensors technology with disruptive real world impact.

optics
Ultralow‐Noise Single‐Frequency Fiber Laser and Application in High‐Resolution Fiber‐Optic Dynamic Strain Sensing

Qilai Zhao,Yuxin Sun,Chun Zeng,Wei Lin,Changsheng Yang,Zhouming Feng,Kaijun Zhou,Xiaoming Wei,Jiulin Gan,Qinyuan Zhang,Zhongmin Yang,Shanhui Xu

DOI: https://doi.org/10.1002/adpr.202200080

2022-01-01

Advanced Photonics Research

Abstract:A 1.5 μm ultralow‐noise single‐frequency fiber laser (SFFL) is realized based on a delay fiber phase‐locked method and the nonlinear amplification effect of a semiconductor optical amplifier (SOA). Via feedback locking of the phase jitter signal, the phase noise achieves the minimum value of −160 dB rad Hz−1/2 m−1 with a maximum reduction of 50 dB. Meanwhile, SOA reduces the intensity noise by a maximum of 65 dB, making it near the shot‐noise limit for frequencies above 40 kHz. To demonstrate this state‐of‐art SFFL with ultralow‐noise property, a high‐resolution fiber‐optic dynamic strain sensing based on a fiber‐based Michelson interferometer (FMI) is performed. As a result, the strain resolution reaches 26 fε Hz−1/2 in the 30–200 Hz band, which is improved by almost three orders of magnitude than that realized by a free‐running SFFL. To the best of the knowledge, this is the first time to achieve such a high‐resolution fiber‐optic dynamic strain sensor in the low‐frequency range utilizing the FMI system. This high‐resolution fiber‐optic strain sensing has promising applications in geophysics and biophotonics. Moreover, this ultralow‐noise SFFL is competitive for sophisticated applications, such as precise absolute distance measurement, quantum key distribution, and generating squeezed light.
High-Resolution Strain and Temperature Sensor Based on Distributed Bragg Reflector Fiber Laser

Li-Yang Shao,Xinyong Dong,A. Ping Zhang,Hwa-Yaw Tam,Sailing He

DOI: https://doi.org/10.1109/lpt.2007.903535

IF: 2.6

2007-01-01

IEEE Photonics Technology Letters

Abstract:We present a high-resolution strain and temperature sensor by using a polarimetric distributed Bragg reflector fiber laser. The mean wavelength and polarization beat frequency of the laser output are utilized to determine the strain and temperature of the sensor. Experimental results show that the sensor has a capability of sensing strain and temperature simultaneously, with root mean square deviations of 9.3 mu epsiv and 0.05degC, respectively.
Pico-Strain Resolution Multiplexed Fiber Grating Sensor Array Interrogated with Mode-Locked Laser

Shuangxiang Zhao,Qingwen Liu,Jiageng Chen,Zuyuan He

DOI: https://doi.org/10.1109/jlt.2019.2923424

2018-01-01

Abstract:A multiplexed fiber grating sensor system based on injection-locking and high-order Pound–Drever–Hall techniques is presented. In the sensor system, two distributed feedback fiber lasers and a mode-locked laser are employed as the sensor array and probe laser, respectively. The weak comb teeth of the mode-locked laser are injection locked to corresponding sensing elements, to suppress the free running noise of the laser sensors and thus interrogate the sensor array. A high strain resolution of 72 p$\boldsymbol {\varepsilon }$ in 100 s and 4 p$\varepsilon$/${\surd }$ Hz above 10 Hz is proved. The proposed method allows the direct use of optical frequency comb as the light source in fiber grating sensor system. We believe this achievement is of great significance for fiber grating sensors in both sensing resolution and multiplexing scale.
High resolution fiber grating dynamic strain sensor with broadband light

Shuting Liu,Qingwen Liu,Shuangxiang Zhao,Zuyuan He

DOI: https://doi.org/10.1364/cleo_at.2022.jw3b.10

2022-01-01

Abstract:A fiber grating strain sensing system based on self-reference mechanism was developed. The resolution is 34.6pε/√Hz at 1kHz, which is several orders of magnitude better than traditional FBG systems.

Sub-nє Static Resolution Fiber Laser Sensor

Sub-N Epsilon Static Resolution Fiber Laser Sensor

Realization of sub-nano-strain static resolution with injection-locking between two fiber laser sensors

An Ultra-High-resolution Large-Dynamic-range Fiber Optic Static Strain Sensor Using Pound-Drever-Hall Technique

0.1-Nano-strain Resolution Fiber Optic Sensor for Quasi-Static Strain Measurement with 1 Ks/s Sampling Rate

A Dynamic Strain Sensor System Based on a Tunable Fiber Ring Laser

Ultrahigh resolution optical fiber strain sensor using dual Pound-Drever-Hall feedback loops.

High Resolution Optical Fiber Sensor for Quasi-Static Strain Measurement by Strain-Temperature Discrimination

Sub-nano resolution fiber-optic static strain sensor using a sideband interrogation technique.

Sub-Nano Resolution Static Strain Fiber Sensor Using A Novel Sideband Interrogation Technique

Sub-Nano-Strain Multiplexed Fiber Optic Sensor Array for Quasi-Static Strain Measurement

Multiplexed Sub-Nano Resolution Quasi-Static Strain Sensor Based on Transient Response of Fabry-Perot Interferometers

Realization of Nano Static Strain Sensing with Fiber Bragg Gratings Interrogated by Narrow Linewidth Tunable Lasers

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

Resonant Fiber-Optic Strain and Temperature Sensor Achieving Thermal-Noise-limit Resolution

Multilongitudinal Mode Fiber Laser for Strain Measurement

A mode-locked fibre laser temperature independent strain sensor based on intracavity pulse interference

Ultralow‐Noise Single‐Frequency Fiber Laser and Application in High‐Resolution Fiber‐Optic Dynamic Strain Sensing

High-Resolution Strain and Temperature Sensor Based on Distributed Bragg Reflector Fiber Laser

Pico-Strain Resolution Multiplexed Fiber Grating Sensor Array Interrogated with Mode-Locked Laser

High resolution fiber grating dynamic strain sensor with broadband light