Abstract:We describe a quasi-distributed optical fiber strain sensor, whose principle of operation is based on the coherent frequency-modulated continuous-wave (FMCW) reflectometry technique. The sensing system is basically composed of a laser diode, which is frequency swept by a triangle waveform injection current and an unbalanced two-beam interferometer. Its test arm consists of a number of single-mode fibers, which act as sensing fibers, with a mirror at the far end and mechanical splices as the connectors as well as the reflectors. Theoretical analysis shows that the measuring resolution of the strain is inversely proportional to the length of the sensing fiber. To measure the strain variation of each sensing fiber, the phase shifts of the beat signals are demodulated by a heterodyne signal processing system. The requirement of a high precision temperature control of light source can be eliminated in this way, since temperature effect is insignificant to the phase demodulation technique. To calibrate and verify the linearity, feasibility, and accuracy of this system, tensile and bending tests were carried out and strain gauge was employed as the benchmarking tool over the experimental results. It was observed that this system is feasible and its accuracy is excellent. © 2002 Society of Photo-Optical Instrumentation Engineers.

Sub-nano resolution fiber-optic static strain sensor using a sideband interrogation technique.

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

High-Sensitivity Microfiber Strain and Force Sensors

Ultrahigh-Resolution Fiber-Optic Sensing Using a High-Finesse, Meter-Long Fiber Fabry-Perot Resonator

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay

High-Resolution Sensing System Based on Fiber Bragg Grating Fabry–Perot Interferometer and Frequency-Domain Demodulation

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Ultra-High Sensitivity and Temperature-Insensitive Optical Fiber Strain Sensor Based on Dual Air Cavities

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

Temperature Insensitive Distributed Wide-dynamic-range Strain Sensing based on Polarization-Maintaining Photonic Crystal Fiber

Optoelectronic hybrid oscillating fiber-optic sensor with attosecond precision and reconfigurable sensitivity

Nonlinear Fiber-Optic Strain Sensor Based on Four-Wave Mixing in Microstructured Optical Fiber

Interferometric Fiber Optic Surface Plasmon Resonance Sensor for Temperature and Strain Measurement