The resistivity calculation method of reactor pressure vessel steels after ion irradiation

Chengliang Li,Guogang Shu,Ben Xu,Wei Liu

DOI: https://doi.org/10.1016/j.nimb.2019.04.056

2019-01-01

Abstract:Studying the changes in electrical properties of reactor pressure vessel steels before and after ion irradiation is one of the main methods to evaluate the irradiation damage effect. Based on the principle of resistance parallel connection, the calculation model of the sample’s irradiation damage layer was established. The resistivity from the irradiated damage layer and the substrate non-irradiated damage layer were measured during a series of polish thinning using the four-lead method. The results show that the calculation model is reasonable and effective, and the theoretical resistivity values of the irradiated damage layer calculated from the above model agreed well with the experimental data provided by the literature. When the ion irradiation dose is 0.0798 dpa, the RPV steel resistivity increases from 3.26 × 10−7 Ω·m to 7.74 × 10−7 Ω·m. Under the same test conditions, the resistivity experimental data obtained from the irradiated damage layer are slightly higher than the experimental data from the substrate non-irradiated damage layer.