Abstract:In this paper, the fretting wear behaviour of steel wires working in coal mining technology is studied numerically. In past studies, the fretting process of steel wires was carried out numerically considering that the coefficient of friction (COF) and wear coefficient (WC) are constant parameters. However, it has been noticed experimentally that COF increases up to a certain number of fretting cycles and then becomes constant, i.e. a steady-state stage, depending on the loading conditions. This increase in COF during the fretting process is also known as the running-up stage. The fretting wear model is modified to evaluate the influence of the varying coefficient of friction (VCOF), which is associated with the variable wear coefficient (VWC), so the influence of VWC is also considered. The subroutine UMESHMOTION used to implement the wear law is also modified to study the effect of VCOF and VWC. Therefore, in this study, the numerical results of a three-dimensional finite element (FE) model are compared, with analytical results of contact area and contact stresses, and with experimental results of peak wear depth. After validating the FE model, the wear scar, the increasing wear depth, wear volume, and the decreasing contact stress with increasing fretting cycles are determined numerically considering VCOF and VWC using cycle jump approach. The energy dissipation effect of frictional force and fretting amplitude is also studied for varying interaction properties of fretting wear models. The numerical simulations are performed by considering both elastic and plastic material properties to analyse the influence of varying interaction properties on fretting wear models at the running-up stage. The results indicate that the VWC model exhibits comparable impacts on both the elastic and plastic models. The results also show that the VWC fretting wear model leads to higher wear scar, wear volume, and wear depth values at the running-up stage as well as at the steady state stage, which are close to the experimental data.

The Effect of Wear on Short Crack Propagation under Fretting Conditions

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

A Study of the Numerical Simulation Technique for Fatigue Crack Closure

Numerical Simulation Of 2d Crack Growth With Frictional Contact In Brittle Materials

Finite element analysis of fretting wear considering variable coefficient of friction

The role of plastic anisotropy deformation in fretting wear predictions

Effects of fatigue damage and wear on fretting fatigue under partial slip condition

Numerical Analysis of Elastic Wear in Line Contact

Finite Element Simulation of Fretting Wear Behaviors under the Ball-on-flat Contact Configuration

Numerical Analysis of Time-Varying Wear with Elastic Deformation in Line Contact

A damage mechanics approach to fretting fatigue life prediction with consideration of elastic–plastic damage model and wear

Study on Wear Evolution of Spur Gears Considering Dynamic Meshing Stiffness

Numerical simulation of distortion-induced fatigue crack growth using extended finite element method

Finite Element Simulation and Fretting Wear Prediction of a Tenon Connection Structure

A Numerical Method to Investigate the Effect of Thermal and Plastic Behaviors on the Evolution of Sliding Wear

Numerical prediction of fretting fatigue crack growth in scaled railway axles considering fretting wear evolution

The Effect Analysis of Contact Stiffness on Wear of Clearance Joint

An Efficient Numerical Model for Predicting the Torsional Fretting Wear Considering Real Rough Surface

Numerical Simulation of the Effect of Surface Microgeometry and Residual Stress on Conformal Contact Fretting Fatigue Crack Initiation Behavior

Simulation of fretting wear in steel wires under variable coefficient of friction and variable wear coefficient