Abstract:It has been long understood that fretting differs from sliding wear in that the relative displacement between the bodies is generally smaller than the size of the contact between them, with debris ejection from the contact thus playing an important role in the behaviour of the contact in fretting. Whilst these ideas were clearly articulated more than 30 years ago via Godet's third-body approach and Berthier's concept of the tribology circuit, calculation of wear rates in fretting have continued to employ Archard's wear equation (or approaches directly derived from it), despite this approach assuming that the rate of wear is controlled by the rate of generation of wear debris (as opposed to the rate of its ejection from the contact). It has been shown recently that when debris ejection is the rate-determining-process in fretting, the instantaneous rate of wear is inversely proportional to a characteristic dimension of the wear scar. When non-conforming specimen pair geometries (such as cylinder-on-flat) are employed in fretting testing, the wear scar size increases as wear proceeds, and thus the instantaneous rate of wear decreases. In this paper, wear equations have been derived for three commonly employed non-conforming pair specimen geometries, which all take the form <math>Vw=KRn−1Edn</math> (<math>Vw</math> is the wear scar volume, <math>R</math> is the radius of the non-plane specimen(s) in the pair and <math>Ed</math> is the frictional energy dissipated) where <math>n</math> varies between 0.67 and 0.8 depending upon the geometry and assumptions made regarding the governing equation. It is argued that the assumptions on which the analysis is based are most valid for the cylinder-on-flat contact configuration with fretting perpendicular to the cylinder axis where the length of the line contact is large compared to the wear scar width. It is demonstrated that, despite the often apparently good fit of experimental data to an Archard-type equation, it is not appropriate to employ such Archard-type approaches to the analysis of fretting data in situations where debris ejection is the rate-determining-process. The equations derived in this paper relating wear scar size to some measure of the duration of the test should be used for such analysis instead of the linear relationships generally employed in previous work.

The role of plastic anisotropy deformation in fretting wear predictions

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Contact size and debris ejection in fretting: The inappropriate use of Archard-type analysis of wear data and the development of alternative wear equations for commonly employed non-conforming specimen pair geometries

Dynamic changes of mechanical properties induced by friction in the Archard wear model

Finite element analysis of fretting wear considering variable coefficient of friction

Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts

+Fretting wear: A phenomological approach

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

A Peridynamic Frictional Contact Model for Contact Fatigue Crack Initiation and Propagation

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Electrical contact resistance endurance of AgNi10 alloys under fretting wear: Experiment and numerical prediction

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Subsurface deformation mechanism and the interplay relationship between strength-ductility and fretting wear resistance during fretting of a high-strength titanium alloy

Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model

Coupling effect of plastic deformation and surface roughness on friction behaviors of rough line contact for ground metal surfaces

Effect of laser shock peening on fretting wear behaviour of AISI 304 stainless alloy

Study on the Fretting Wear Evolution Model of Wires with Curvature Inside Metal Rubber

A computationally efficient method for the prediction of fretting wear in practical engineering applications

Modification methodology of fretting wear in involute spline

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

Experimental Analysis and Wear Prediction Model Based on Friction Heat for Dry Sliding Contact