Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

A damage mechanics approach to fretting fatigue life prediction with consideration of elastic–plastic damage model and wear

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A New Approach for Studying Fatigue Damage

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Structural mechanics model for anisotropic damage and fatigue life prediction method of face-centered cubic metal materials

A comparative study of several life prediction models based on the critical plane approach for fretting fatigue crack initiation

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

A rolling contact fatigue health prediction model based on load interaction and damage energy accumulation

An Elasto-Plastic Damage Accumulation Model for Fatigue Life Predication of Ductile Metals at the Yield Stress

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

A Peridynamic Frictional Contact Model for Contact Fatigue Crack Initiation and Propagation

Strength and stiffness degradation modeling and fatigue life prediction of composite materials based on a unified fatigue damage model

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

Finite element analysis of fretting wear considering variable coefficient of friction

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

Thermomechanical fatigue life prediction of metallic materials by a gradient‐enhanced viscoplastic damage approach