Abstract:Lithium in spodumene is tightly bound by coulombic forces inside the silicon-oxide and aluminum-oxide polyhedron structure. Therefore, the key to the extraction of lithium from spodumene is destroying the aluminosilicate structure. Traditionally, the naturally occurring α-spodumene needs to be roasted at 1000 °C to be converted to β-spodumene, and is then decomposed with acid. This method greatly increases energy consumption and environmental pollution. Therefore, developing a new technology to extract lithium from α-spodumene is an urgent matter. Aluminosilicates are common gangue minerals that coexist with bauxite. Diaspore is a type of refractory bauxite, and its decomposition requires a high temperature and alkalinity during the Bayer process. However, under such conditions, aluminosilicate gangues, such as kaolinite and illite, are preferentially decomposed, which leads to a heavy burden caused by the desilication products. The main structures of spodumene and illite contain both tetrahedral [SiO4] and octahedral [AlO6] geometries, in which the Si4+ in [SiO4] is partially replaced by Al3+, which causes the cation Li+ or K+ to enter the mineral structure and maintain the overall charge neutrality. Based on the similarities between spodumene and illite, it is speculated that the Bayer method may be used to treat α-spodumene. Experiments were carried out to verify this possibility. The results indicate that α-spodumene can indeed be directly decomposed by alkali. The addition of CaO, and a higher temperature and alkalinity, had a significant influence on the decomposition reaction. Under optimized conditions, the lithium leaching efficiency was 93%. Sodium phosphate was used to precipitate lithium from an alkaline leach solution considering the low solubility of Li3PO4, and the alkali-containing mother liquor was reused. During ten consecutive cycles in the proposed flowsheet, the α-spodumene decomposition was stable, and resulted in about 90% leaching efficiency of lithium. The closed loop extraction process can significantly reduce energy consumption, and provides a new process for the sustainable development of lithium resources.

Lithium Extraction and Hydroxysodalite Zeolite Synthesis by Hydrothermal Conversion of Α-Spodumene

Conversion from Α-Spodumene to Intermediate Product Li2SiO3 by Hydrothermal Alkaline Treatment in the Lithium Extraction Process

Lithium Recovery from Pretreated Α‐spodumene Residue Through Acid Leaching at Ambient Temperature

A promising approach for directly extracting lithium from α-spodumene by alkaline digestion and precipitation as phosphate

Lithium Extraction and Zeolite Synthesis via Mechanochemical Treatment of the Silicate Minerals Lepidolite, Spodumene, and Petalite

A Novel Technology for Lithium Extraction Through Low-Temperature Synergistic Roasting of Α-Spodumene with Lepidolite

Extraction of Lithium and Synthesis of Kaolinite from α‐Spodumene via Alkali Calcination

Kinetics and Mechanism of Lithium Extraction from Α-Spodumene in Potassium Hydroxide Solution

Direct Lithium Extraction from α-Spodumene through Solid-State Reactions for Sustainable Li2CO3 Production

Direct Preparation of Water-Soluble Lithium Salts from Α-Spodumene by Roasting with Different Sulfates

Direct extraction of lithium from ores by electrochemical leaching

Selective and efficient extraction of lithium from spodumene via nitric acid pressure leaching

Aspects of Spodumene Lithium Extraction Techniques

Thermochemically Driven Crystal Phase Transfer Via Mechanical Activation-Assisted Chlorination Roasting Toward the Selective Extraction of Lithium from Spodumene

Fundamental Study of Leaching Kinetics and Mechanism of Spodumene Assisted by Mechanical Activation

Extraction of Lithium from β-Spodumene via Ion Exchange in Molten Sodium Salts

Sustainable and efficient recovery of lithium from sodium sulfate by-product of lithium hydroxide production process using solvent extraction

Extraction of Lithium from Lepidolite by Sulfation Roasting and Water Leaching

A New Method for Producing Hydrogen, Lithium Metal, and High-Purity Silicon from Spodumene Ore

A Low-Temperature Process for Lithium Extraction from Lithium-Bearing Mineral: Conversion Behavior and Mechanisms

Conversion of Aluminosilicate Residue Generated from Lithium Extraction Process to NaX Zeolite