Abstract:There is a vast amount of globally underutilized low-grade mine tailings and leach residues, including those from primary processing of gold. In this research, the target is to recover the remaining gold (10.9 g/t) from weathered refractory iron-rich residue that had previously been subject to autoclave oxidation, subsequent cyanidation in a conventional carbon-in-leach (CIL) circuit as well as storage at tailings area. Chloride leaching has been considered as one of the most promising cyanide-free gold leaching methods and it has shown positive outcomes in treating primary gold ores, concentrates, and flotation tailings. Therefore, in the current study, the iron-rich residue investigated was subjected to chloride leaching combined with simultaneous carbon adsorption. The investigated parameters included leaching time (2–8 h), chloride concentration ( [Cl − ] = 0.2–5 M), type and concentration of oxidant ( [Cu 2+ ]/[Fe 3+ ] = 0.1–1 M), as well as type and concentration of activated carbon (14–25 g/L), whereas S/L ratio (100 g/L), acidity ( pH = 1), and temperature (90 °C) were kept constant. Leaching results indicate that up to 40% of the remaining gold could still be recovered from the investigated residue with optimized chloride leaching. According to the results, the most important parameter for gold recovery was the leaching time. Moreover, of the studied oxidants, cupric ions were shown to contribute more to gold recovery when compared to ferric ions (35% vs. 24% at [Cu 2+ ]/[Fe 3+ ] = 0.1 M). Nevertheless, an increase of cupric concentration from 0.1 M (low-concentrated) to 0.5 M, resulted in only a slight increase in gold recovery (from 36% to 40%), whereas no further improvement in gold recovery was achieved with a 1 M cupric concentration. Two studied activated carbon products showed equal effectiveness in gold adsorption. In-situ carbon adsorption was shown to occur effectively in chloride media, as all dissolved gold could be detected in the activated carbon, and the concentration of remaining gold in the pregnant leach solution was minimal (< 0.02 mg/L). These findings indicate that low-concentrated chloride leaching of leach residues from industrial gold processes can allow an enhanced recovery of gold from previously mined and treated raw materials.

Cleaner process: Efficacy of chlorine in the recycling of gold from gold-containing tailings

Evaluation of a cleaner production for cyanide tailings by chlorination thermal treatments

The Recovery of Gold in Low-Grade Cyanide Tailings by Chlorination Roasting

Evaluation of a green-sustainable industrialized cleaner utilization for refractory cyanide tailings containing sulfur

Simultaneous Extraction of Gold and Vanadium From Vanadium and Carbon-Rich Refractory Gold Minerals by Chlorination Roasting

Recovery and kinetics of gold and iron from cyanide tailings by one-step chlorination–reduction roasting

A green and efficient utilization of refractory cyanide tailings containing inclusion gold by microwave roasting

Novel process for deep removal of chlorine and recycling of chlorinated tailings from titanium-bearing blast-furnace slag

Gold recovery from cyanidation residue by chloride leaching and carbon adsorption – Preliminary results from CICL process

Application of diagnostic roasting method in thermochemical treatment for Au recovery from gold-containing tailings in microwave field

Role of hypochlorite in the harmless treatment of cyanide tailings through slurry electrolysis

Effectiveness of microwave-assisted thermal treatment in the extraction of gold in cyanide tailings

Experimental analysis on cyanide removal of gold tailings under medium-temperature roasting

Kinetics of simultaneous recovering of Au and Ag from CTs by chloridizing volatilization methods

Recovery and kinetics of gold and vanadium from vanadium-bearing carbonaceous gold by chlorination roasting-acid leaching

Sustainable processing of gold cyanide tailings: Reduction roasting, mechanical activation, non-cyanide leaching, and magnetic separation

Recovery of Lead and Chlorine Via Thermal Co-Treatment of Municipal Solid Waste Incineration Fly Ash and Lead-Rich Waste Cathode-Ray Tubes: Analysis of Chlorination Volatilization Mechanism.

Renewable ammonium chloride-induced calcium leaching of gold and copper tailings and selective preparation of vaterite CaCO 3 by CO 2 mineralization

Recovery of Zinc and Lead from Copper Smelting Slags by Chlorination Roasting

Optimization Process of the Refractory Gold Ore Extraction by Hypochlorite Oxidative Leaching

Efficient Recycling of Silver and Copper from Sintering Dust by Chlorination Roasting Process