Abstract:In the disposal of electronic waste, cathode ray tube (CRT) funnel glass remains an urgent environmental problem because of its high lead content. This research developed mechanical activation as a pretreatment process, and it proved to be an effective method for extracting lead from CRT funnel glass. The effects of mechanical activation on the structural changes of CRT funnel glass were investigated using X-ray diffraction (XRD), particle size analysis, specific surface area (SSA), and a scanning electron microscope (SEM). Nitric acid leaching behaviors of the activated CRT funnel glass were studied by varying several parameters: leaching time, liquid-to-solid ratio, acid concentration, and heating temperature, as well as various conditions of activation. The lead recovery rate was observed to increase rapidly, particularly with increases in activation time and leaching temperature, but to vary relatively less under other experimental parameters. Under the optimal leaching conditions, the lead recovery rate for funnel glass activated for 2 hr at the rotational speed of 500 rpm (by ball mill) reached 92.5%, compared with 1.2% from the unactivated sample.Implications: CRT funnel glass containing lead has become a serious environmental problem facing the whole world. In order to dispose of CRT funnel glass, some technologies have been developed. However, these technologies are associated with higher operation and maintenance costs. In this study, mechanical activation was introduced to change the physicochemical properties of CRT funnel glass, which can transform the glass into an easily dissolved one. Under atmospheric pressure leaching conditions, good recovery rate for lead can be achieved and the residue has wide uses. The process can be applied to treat other leaded glass or lead-containing wastes.Supplemental Materials: s paper. Go to the publisher's online edition of the Journal of the Air and Waste Management System.

Recovery of Lead and Chlorine Via Thermal Co-Treatment of Municipal Solid Waste Incineration Fly Ash and Lead-Rich Waste Cathode-Ray Tubes: Analysis of Chlorination Volatilization Mechanism.

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Fate of Cl and chlorination mechanism during municipal solid waste incineration fly ash reutilization using thermal treatment: a review

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Mitigating Heavy Metal Volatilization During Thermal Treatment of MSWI Fly Ash by Using Iron(iii) Sulfate As a Chlorine Depleting Agent

The removal of chloride from washing leachate of MSWI fly ash

Promotion of chloride removal from MSWI fly ash by an accelerated wet-carbonation process to enhance ash recycling in cement manufacture

Synergistic effect of polyvinyl chloride and coal ash on thermal separation of heavy metals from MSWI fly ash through molten salt process

Experimentation Study on Removal Chlorine from Incineration Fly Ash by Washing Process

Effect of Chlorine-Containing Compounds on Evaporation of Heavy Metals in Secondary Gasification of Fly Ash from Municipal Solid Waste Incinerator

Effectiveness of thermal treatment on Pb recovery and Cl removal from sintering dust

Experimental Investigation of Vitrification Process for the Disposal of Hazardous Solid Waste Containing Chlorides

Thermal co-treatment of aluminum dross and municipal solid waste incineration fly ash: Mineral transformation, crusting prevention, detoxification, and low-carbon cementitious material preparation

Effect of CaCl2 addition on heat treatment of heavy metals in municipal solid waste incineration fly ash

Novel process for deep removal of chlorine and recycling of chlorinated tailings from titanium-bearing blast-furnace slag

Thermal cotreatment of municipal solid waste incineration fly ash with sewage sludge for PCDD/Fs decomposition and reformation suppression

Process optimization and mechanism for removal of high-concentration chlorine from municipal solid waste incineration fly ash washing wastewater by Friedel's salt

Effect of additives and steam on chlorine transformation during plasma melting of fly ash

Lead Recovery from Cathode Ray Tube Funnel Glass with Mechanical Activation

Introducing Reactive Magnesia to Activate Chloride/Sulfate in Waste Incinerator Fly Ash for Immobilization of Potentially Toxic Elements

Simultaneous realization of heavy metal Cd solidification and chloride separation in municipal solid waste incineration fly ash: Mechanism and DFT analysis