Abstract:Brick kiln co-treatment is a novel industrial hazardous wastes (IHWs) utilization process. However, the effects of chlorine (Cl) in wastes on heavy metals (HMs) during this process are overlooked. This study investigated the stabilization/solidification (S/S) and volatilization, as well as long and short-term leaching, of HMs in Cl-containing bricks. The results indicated enhanced formations of stable mineral phases (NiFe 2 O 4 , Ni 2 SiO 4 , Cd 3 Al 2 Si 3 O 12 , CdSiO 3 , FeCr 2 O 4 , Cr 2 O 3 , CuFe 2 O 4 , and CuAl 2 O 4 ) in bricks at a low sintering temperature (800 °C) due to the affinity between Cl and HMs. By comparing HM concentrations before and after sintering in bricks, the study observed that Cl's presence significantly elevated the volatilization rates for Cd and Cu by 30.8% and 14.2%, respectively. In contrast, the effect on volatilization for Ni and Cr was not significant. Additionally, utilizing the NEN 7375 method, the cumulative leaching rates of Ni, Cd, Cr, and Cu over a 64-day experiment under extremely acidic conditions were 0.22%, 7.18%, 0.01%, and 1.46%, respectively. Similarly, higher short-term leaching rates of Cd (4.03%) and Cu (5.73%) than those of Ni (0.94%) and Cr (0.08%) were observed. This finding might be attributed to the lower stability of the Cd and Cu solid phases under acidic environments compared to those of Ni and Cr. Surface wash-off, dissolution, and diffusion were the processes governing HM leaching from bricks. The 10-year projections revealed a minimal release of HMs during future extended leaching, implying the successful S/S of HMs. This study provides a reference for assessing the environmental impacts of brick kiln co-processing of Cl-containing IHWs.

Effectiveness of thermal treatment on Pb recovery and Cl removal from sintering dust

Efficient Recycling of Silver and Copper from Sintering Dust by Chlorination Roasting Process

A green process for the conversion of hazardous sintering dust into K2SO4 and NH4Cl fertilizers

Recovery of Lead and Chlorine Via Thermal Co-Treatment of Municipal Solid Waste Incineration Fly Ash and Lead-Rich Waste Cathode-Ray Tubes: Analysis of Chlorination Volatilization Mechanism.

Innovative methodology for the utilization of low-grade pyrite cinder containing heavy metals via hydrothermal alkali melting followed by chlorination roasting

Selective removal of zinc and lead from electric arc furnace dust by chlorination–evaporation reactions

Evaluation of a green-sustainable industrialized cleaner utilization for refractory cyanide tailings containing sulfur

A Study on Chloride Extraction and Sintering Stabilization of MSWI Fly Ash

Simulation of heavy metals behaviour during Co-processing of fly ash from municipal solid waste incineration with cement raw meal in a rotary kiln

Thermodynamic analysis and process optimization of zinc and lead recovery from copper smelting slag with chlorination roasting

Migration of harmful elements in municipal sludge under high-temperature oxidation conditions

Influence of chlorine on co-processing of hazardous wastes in brick kilns

Effective disposal of hazardous waste from non-ferrous waste recycling through thermal treatment

Mitigating Heavy Metal Volatilization During Thermal Treatment of MSWI Fly Ash by Using Iron(iii) Sulfate As a Chlorine Depleting Agent

Recovery of Zinc and Lead from Copper Smelting Slags by Chlorination Roasting

Novel process for deep removal of chlorine and recycling of chlorinated tailings from titanium-bearing blast-furnace slag

Effect of Additive and Washing Pre-treatment on Heavy Metal Vaporization During Sintering Process of MSWI Fly Ash

Heavy metal and metalloid emissions during co-processing of waste in a sintering kiln: Migration characteristics in the kiln and long-term leaching from bricks

Effect of HCl/SO2/NH3/O2 and mineral sorbents on the partitioning behaviour of heavy metals during the thermal treatment of solid wastes.

Effect of NaCl on the migration of heavy metals during the non-isothermal and isothermal combustion of sludge: Static and dynamic analyses

Fate of Cl and chlorination mechanism during municipal solid waste incineration fly ash reutilization using thermal treatment: a review