Promotion of chloride removal from MSWI fly ash by an accelerated wet-carbonation process to enhance ash recycling in cement manufacture
Yunmei Wei,Xiaoqi Du,Sijie Liu,Yi Wen,Qin Liao,Gangzhen Jiao,Takayuki Shimaoka,Shengjun Tang
DOI: https://doi.org/10.1016/j.jece.2024.112591
IF: 7.7
2024-03-28
Journal of Environmental Chemical Engineering
Abstract:Chlorides, sulfates, and heavy metals are the three main factors preventing the recycling of municipal solid waste incineration (MSWI) fly ash as an alternative material for cement clinker production, of which chloride plays the main role due to its extremelly hign content in fly ash. This study evaluated three wet-based pretreatment methods (water-washing, CO 2 -aided washing, and flue gas-aided washing) to remove chlorides using MSWI fly ashes from 13 incineration plants in China. Water washing was suitable for removing Cl - from MSWI fly ash containing a limited amount of less-soluble Cl-containing salts (Ca(OH)Cl, Ca 2 Al(OH) 6 (H 2 O) 2 Cl, and Ca 6 (CO 3 ) 2 (OH) 7 Cl). However, for fly ash with a significant proportion of these less-soluble Cl-containing salts, injection of CO 2 /flue gas during washing promoted their decomposition and increased the chloride removal rates by 2–12%. Compared with chloride, the removal rate of sulfate was lower under all treatment scenarios and ranged from 7% to 47%. Therefore, caution should be taken when exploring techniques for the deep removal of chloride from MSWI fly ash, as sulfates may be the limiting factor in fly ash samples with low chloride contents when utilizing the fly ash for cement clinker production. Heavy metals in fly ash were not a limiting factor for any ash samples (either raw ash or treated ash) when utilizing the fly ash for clinker production. However, the dissolution of heavy metals in the washing solution deserves more attention, as a large amount of wastewater will be generated during wet-based pretreatment methods. This study confirmed that CO 2 /flue gas injection during washing promoted the removal of the less-soluble harmful components of fly ash, expanding the applications of ash materials.
engineering, chemical, environmental