Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

A System For Verifying Models And Classification Maps By Extraction Of Information From A Variety Of Data Sources

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Experimentation Study on Removal Chlorine from Incineration Fly Ash by Washing Process

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Study on Three-Stage Counter-Current Water Washing Desalination Characteristics and Mechanism of High Chlorine Waste Incineration Fly Ash

Resource Disposal and Products of Fly Ash from Domestic Waste Incineration in Zhejiang Province, China: Migration and Change of Hazardous Heavy Metals

Effects of phosphoric acid washing on immobilization of heavy metals in municipal solid waste incineration fly ash

A Study on Chloride Extraction and Sintering Stabilization of MSWI Fly Ash

Characteristics of fly ash from waste-to-energy plants adopting grate-type or circulating fluidized bed incinerators: a comparative study

SEM/EDS and XRD characterization of raw and washed MSWI fly ash sintered at different temperatures.

Two-stage Countercurrent Water-Washing Characteristics of Municipal Solid Waste Incineration Fly Ash from Grate Furnace

Physicochemical and pozzolanic properties of municipal solid waste incineration fly ash with different pretreatments

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Acid Controlled Washing of Municipal Solid Waste Incineration Fly Ash: Extraction of Calcium Inhibiting Heavy Metals and Reaction Kinetics.

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Effect of supercritical water oxidation onthe PCDD/FS and heavy metals in incineration fly ash

Effects of Phosphoric Acid Washing on Thermal Stability and Chemical Stability of Heavy Metals of MSWI Fly Ash

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Experimental study on the washing characteristics of fly ash from municipal solid waste incineration

Single column approach for the liquid chromatographic separation of polar and non-polar glucosinolates from broccoli sprouts and seeds.