Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Using an easy interface passivation layer to improve performance of inverted polymer solar cells

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Efficient Inverted Polymer Solar Cells with ITO Cathode Modified by Zinc Oxide and Polyethylene Oxide Bilayers

Improving Both Efficiency and Stability of Inverted Polymer Solar Cells by Incorporating Carbon Dots As Cathode Modified Layer

Hydroxyl-Terminated CuInS2-Based Quantum Dots: Potential Cathode Interfacial Modifiers for Efficient Inverted Polymer Solar Cells.

Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

Enhanced Efficiency of Inverted Polymer Solar Cells Using Two-Step Sputtered ZnO As Cathode Interfacial Layer

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Interfacial Passivation of the p-Doped Hole-Transporting Layer Using General Insulating Polymers for High-Performance Inverted Perovskite Solar Cells

Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes

Highly Efficient Inverted Polymer Solar Cells Based on a Cross-Linkable Water-/Alcohol-soluble Conjugated Polymer Interlayer.

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications

Toward High Performance Inverted Polymer Solar Cells

Surface Regulation with Polymerized Small Molecular Acceptor Towards Efficient Inverted Perovskite Solar Cells

Efficient Inverted Polymer Solar Cells Through Modified Electron Extraction Layer

In Situ Back‐Contact Passivation Improves Photovoltage and Fill Factor in Perovskite Solar Cells

High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO

Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells

Efficient Polymer Solar Cells by Lithium Sulfonated Polystyrene As a Charge Transport Interfacial Layer

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer