Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Self‐Induced Bi‐interfacial Modification via Fluoropyridinic Acid For High‐Performance Inverted Perovskite Solar Cells

A New Alcohol‐Soluble Polymer PFN‐ID as Cathode Interlayer to Optimize Performance of Conventional Polymer Solar Cells by Increasing Electron Mobility

Synergistic optimization of interfacial energy-level alignment and defect passivation toward efficient annealing-free inverted polymer solar cells

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Inverted Perovskite Solar Cells with >85% Fill Factor via Sequential Interfacial Engineering

Flexible inverted polymer solar cells with an indium-free tri-layer cathode

Simultaneously Enhanced J(Sc) And Ff By Employing Two Solution-Processed Interfacial Layers For Inverted Planar Perovskite Solar Cells

Enhancing performance of inverted polymer solar cells by an effective novel double layer combining MoO3 and PEIE

Towards 26% efficiency in inverted perovskite solar cells via interfacial flipped band bending and suppressed deep-level traps

Tailoring Perovskite Adjacent Interfaces by Conjugated Polyelectrolyte for Stable and Efficient Solar Cells

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications

Reduced bilateral recombination by functional molecular interface engineering for efficient inverted perovskite solar cells

Fluorinated Perylene‐diimides: Cathode Interlayers Facilitating Carrier Collection for High‐Performance Organic Solar Cells

Highly efficient inverted polymer solar cells based on ethanolamine-treated indium tin oxide as cathode

Conductive Water/Alcohol-Soluble Neutral Fullerene Derivative As an Interfacial Layer for Inverted Polymer Solar Cells with High Efficiency

An efficient and thickness insensitive cathode interface material for high performance inverted perovskite solar cells with 17.27% efficiency

Enhanced Efficiency of Inverted Polymer Solar Cells Using Two-Step Sputtered ZnO As Cathode Interfacial Layer

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer