Abstract:The performance parameters and service life of the insulation layer of high-voltage cables are the key to ensure safe cable operation. Through extracting the mechanical parameters of high voltage cable insulation layer under different thermal aging temperatures, a normal linear regression model is established to predict the service life of high voltage cables. Meanwhile, the physicochemical characteristics such as microscopic morphology and molecular structure changes of the cable insulation layer are analyzed, the dielectric properties and breakdown field strength under ac condition are tested and the macroscopic electrical properties of the insulation layer are studied, and the insulation failure mechanism is further analyzed. The experimental results show that the elongation at break retention rate of cross-linked polyethylene (XLPE) increases slowly with the aging time, and then decreases rapidly when it reaches 50% of the initial elongation at break retention rate. The normal linear regression prediction model is established based on the Arrhenius formula, and it can be obtained the life endpoint of XLPE high voltage cable about 65 years at an operating temperature of 70 °C. Further analysis, under the action of heat and oxygen, the crystal zone structure of cable insulation is seriously damaged, and the carbonyl index is significantly increased. Accordingly, when the aging failure point is reached, the dielectric permittivity and dielectric loss of insulation are significantly increased, and the breakdown performance is significantly decreased. The work has an important guiding significance for insulation condition assessment and life prediction of high voltage cable.

Dynamic Thermal Analysis of High-voltage Power Cable Insulation for Cable Dynamic Thermal Rating

Real‐time Calculation of Three Core Cable Conductor Temperature Based on Thermal Circuit Model with Thermal Resistance Correction

Dynamic thermal analysis for underground cables under continuously fluctuant load considering time-varying van wormer coefficient

Investigation on Dielectric Insulation Properties of ±525 Kv HVDC XLPE Material for High Temperatures Applications

An Improved Analytical Thermal Rating Method for Cable Joints

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Modeling Thermal Distribution of Three-core XLPE Dynamic Cable under Mechanical Loads

Analysis of the Three-Dimensional Temperature Distribution and Ampacity of Forced Ventilation Multi-loop Cable Tunnel by Finite Element Method

Numerical Calculation of Real-Time Ampacity of High Voltage Power Cable Duct Laying Based on Environmental Information

An improved analytical thermal rating method for cables installed in short-conduits

Numerical analysis of thermo-electric field for 10 kV AC XLPE cable in DC operation

Coupled electromagnetic-thermal modeling the temperature distribution of XLPE cable

Thermal Resistance Properties of the Part between Metal Sheath and Conductor in High-voltage Power Cable

Electric field calculation and optimization for stress cone of DC cable joint based on the coaxial double-layer insulation model

Multi-physical Field Simulation and Parameter Inversion Method Based on Digital Twin Model

3-D thermal analysis and contact resistance evaluation of power cable joint

Research on thermomechanical effects and influencing factors in high voltage cable under multiphysics field coupling

Simulation Analysis of Electromagnetic and Heat Field Distribution in 330kv High Voltage AC Cable

The Lifetime Prediction and Insulation Failure Mechanism of XLPE for High-Voltage Cable

Heat Blockage of Air Gap for Inner Overheating of High-Voltage Power Cable and Delay of Early Detection

Numerical and experimental research on electromagnetic-thermal and leakage defects characteristics of the high voltage cable terminal