Abstract:The predominant method for improving the mechanical characteristics of aluminum -lithium (Al-Li) alloys during laser welding is by regulating the transition from columnar crystals to equiaxed crystals. The transition is facilitated through the incorporation of TiC particles, which play a crucial role in augmenting the strength and toughness of the aluminum alloy. The inclusion of TiC particles offers a new opportunity to enhance the utilization of Al-Li alloys in laser welding procedures. The main aim of this study is to control the transition from columnar to equiaxed crystal structures by creating a TiC nanoparticle-reinforced aluminum alloy filler wire. This is intended to improve the properties of laser -welded joints. The study investigates the impact of different TiC particle contents on the microstructural characteristics. The presence of TiC particles is noted to enhance the transformation of columnar crystals into equiaxed crystals in the welded joints, resulting in a refined microstructure. The augmentation of particle content results in a notable reduction in the average grain size, decreasing from 78.25 mu m to 37.15 mu m. This alteration shifts the directional growth preference from specific crystallographic axes to a stochastic trajectory. Significantly, when the particle content reaches 0.6 wt%, remarkable enhancements in both tensile strength and elongation are evident, resulting in an ultimate tensile strength of 318 MPa and an elongation of 4.8 %. The dispersed configuration of TiC particles plays a pivotal role in hindering the movement of dislocations, consequently increasing the energy necessary for this mechanism. Moreover, the existence of these particles at grain boundaries impedes the propagation of cracks by altering the direction of the crack path, absorbing additional energy, and consequently improving toughness. An evident pattern emerges when examining higher particle concentrations, indicating that a decrease in ultimate tensile strength is concomitant with an increase in elongation.

Microstructure and Mechanical Properties of TiC/AlSi10Mg Alloy Fabricated by Laser Additive Manufacturing under High-Frequency Micro-Vibration

Effects of Laser Processing Parameters on Microstructure and Mechanical Properties of Additively Manufactured AlSi10Mg Alloys Reinforced by TiC

Effect of High-Frequency Micro-Vibration on Microstructure and Properties of Laser Cladding Aluminum Coatings

Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Effects of pulsed frequency on the microstructure characteristics and properties of Ti6Al4Vlaser melting deposition additive manufacturing parts

Microstructure and Properties of TiC/AlMgSc Composites by Selective Laser Melting

On the texture and mechanical property anisotropy of Ti6Al4V alloy fabricated by powder-bed based laser additive manufacturing

Microstructure evolution and tensile property of TiAl alloy using continuous direct energy deposition technique

Microstructure and Mechanical Properties of Laser Metal Deposited AlSi10Mg Alloys

Microstructure and mechanical properties of TiC nanoparticles reinforced 7075 aluminium alloy fabricated by oscillating laser-arc hybrid additive manufacturing

Study of microstructure and compressive strength of a novel Ti-0.75Al-9.5V alloys manufactured by laser deposition melting

Anisotropic Tensile Behavior of Ti-47Al-2Cr-2Nb Alloy Fabricated by Direct Laser Deposition

Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl

Enhancing Hardness and Wear Performance of Laser Additive Manufactured Ti6Al4V Alloy Through Achieving Ultrafine Microstructure

Effects of Micron/Submicron TiC on Additively Manufactured AlSi10Mg: A Comprehensive Study from Computer Simulation to Mechanical and Microstructural Analysis

Microstructure and Mechanical Properties of 600℃High Temperature Titanium Alloy Fabricated by Additive Manufacturing

Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration

Effects of Laser Oscillation Frequency on the Microstructure and Properties of TiC/Fe‐Based Alloy Composite Coatings

Controlling the Columnar-to-equiaxed Transition and Crack Propagation Behavior of Laser Welded Al-Li Alloy Reinforced with TiC Nanoparticles