Abstract:The self-closed bonds limit the molecular adsorption on graphene, which in turn leads to low sensitivity of the gas sensors. In this article, a gas sensor based on surface-oxidized chemical vapor deposited (CVD) graphene is presented for ammonia (NH3) gas sensing. Oxygen functional groups are introduced in graphene through the in situ UV-ozone (UVO) treatment, which is considered to be convenient, low cost, and compatible with large-scale preparation. The NH3 with concentration ranging from 50 to 500 ppm has been tested to evaluate the sensing performance of the proposed gas sensors. The results show that sensor treated for 4 min exhibits the best response to NH3 which is over four times than that of pristine graphene. More importantly, the sensing response increases linearly from 8.93% to 43.11% under 500-ppm NH3 as UVO treatment time increase in the range from 0 to 4 min, whereas the gas response decreased to 28.15% after exposure time is up to 8 min. This may be because surface oxidation dominates during short-term UVO exposure, but destructive etching dominates during a long-term exposure. In addition, the response speed of UVO-treated gas sensor is much faster than that of pristine graphene, whereas no significant change is observed in the recovery process. The proposed gas sensor also exhibits good selectivity, while there is a slight degradation of 5% in long-term stability after 18 days. The proposed facile method may provide reference value for the improvement of surface modification and gas sensing properties of other two-dimensional (2-D) materials.

Controllable Growth of Vertically Oriented Graphene for High Sensitivity Gas Detection

Vertically aligned PANI nanorod arrays grown on graphene oxide nanosheets for a high-performance NH<sub>3</sub> gas sensor

Vertically aligned PANI nanorod arrays grown on graphene oxide nanosheets for a high-performance NH3 gas sensor

Self-organized Growth of Graphene Nanomesh with Increased Gas Sensitivity

Controllable Decoration of CVD-grown Graphene with Au NP As a Promising Ammonia Sensing Platform

Growth of carbon nanowalls at atmospheric pressure for one-step gas sensor fabrication

A Facile Way to Improve the Sensing Performance of CVD Graphene

Large-area nanopatterned graphene for ultrasensitive gas sensing

Centimeter-Scale Ge-Assisted Grown Graphene Directly on SiO 2 /Si for NO 2 Gas Sensors

High sensitive gas sensor based on vertical graphene field effect transistor

Orientation Controlled Preparation of Nanoporous Carbon Nitride Fibers and Related Composite for Gas Sensing under Ambient Conditions

Preparation and Test of NH3 Gas Sensor Based on Single-Layer Graphene Film

PECVD growth of graphene on sapphire substrate and its gas sensor

Growth, Characterization, and Application of Vertically Aligned Carbon Nanotubes Using the RF-Magnetron Sputtering Method

Direct Growth of Vertically-Oriented Graphene for Field-Effect Transistor Biosensor

Ultrasensitive Gas Detection of Large-Area Boron-Doped Graphene

Au-decorated Porous Structure Graphene with Enhanced Sensing Performance for Low-Concentration NO 2 Detection

Highly Sensitive Chemical Gas Sensor Based on Graphene Deposited D-shaped-fiber

Green Synthesis of 3D Chemically Functionalized Graphene Hydrogel for High-Performance NH3 and NO2 Detection at Room Temperature

Epitaxial graphene gas sensors on SiC substrate with high sensitivity

Transfer of CVD-grown graphene for room temperature gas sensors