Highly Sensitive Chemical Gas Sensor Based on Graphene Deposited D-shaped-fiber

Y. Wu,B. C. Yao,X. L. Cao,Z. G. Wang,Y. J. Rao,Y. F. Chen,K. S. Chiang

DOI: https://doi.org/10.1364/cleo_at.2015.af2j.2

2015-01-01

Abstract:A graphene coated D-shaped fiber chemical-gas sensor demonstrated, with maximum sensitivity ~0.04ppm and ~0.1ppm for NH 3 and H 2 O gas detections, respectively. This work may pave a way to explore graphene based lab-on-fiber devices.

What problem does this paper attempt to address?

High Sensitive Reduced Graphene Oxide-Based Room Temperature Ionic Liquid Electrochemical Gas Sensor with Carbon-Gold Nanocomposites Amplification

Hao Wan,Ying Gan,Jiadi Sun,Tao Liang,Shuqi Zhou,Ping Wang

DOI: https://doi.org/10.1016/j.snb.2019.126952

IF: 9.221

2019-01-01

Sensors and Actuators B Chemical

Abstract:Gas sensors have received extensive attractions due to their critical roles in environmental monitoring, industry manufacture and human safety. This paper for the first time introduces carbon-gold nanocomposites on a reduced graphene oxide based electrochemical gas sensor for high sensitive gas detection. Carbon-gold nano-composites (CGNs) were synthesized by glucose carbonization and gold nanoparticles deposition using the hydrothermal method. Reduced graphene oxide (RGO) was electrochemically deposited on a screen-printed gold electrode with subsequent modification of CGNs. To achieve long lifetime and good stability, thin-film room temperature ionic liquid (RTIL) was utilized as the electrolyte featuring negligible evaporation and large potential window, thus implementing the high sensitive RTIL-based electrochemical gas sensor. The amplification effect of RGO and CGNs modification was investigated using cyclic voltammetry, chronoamperometry and transient double potential amperometry (DPA), which reveals the significant enhancement of sensor performance by synergic application of RGO and CGNs. The sensor was calibrated for oxygen detection from 0.42% to 21% with good sensitivity and linearly. The reproducibility of the sensor using chronoamperometry and transient DPA was also studied with excellent reproducibility. The study paves a new way to implementing high sensitive electrochemical gas sensors for rapid monitoring of gas exposure.
Ultra-Sensitive Absorption-Based Gas Detecting Using Graphene-Covered Periodic Photonic Crystal Slabs Resonating Under Critical Coupling Condition at Mid-Infrared Frequencies

Mohammad Mahdi Ghods,Majid Afsahi

DOI: https://doi.org/10.1109/TNB.2022.3172558

Abstract:In this paper, a novel chemical sensor is presented based on graphene deposited on the periodic pattern of the photonic crystal. The sensor structure is very simple to fabricate. Also, the proposed sensor thickness in the order of the nanometer makes it compact and suitable for integrating with optical equipment. The principle of sensing is based on the doping process of graphene due to the adsorption of the chemical molecules that serve as charge carriers. The sensor action under critical coupling results in generating the mid-infrared fano-resonance of the half-absorption band. Then, manipulating the graphene Fermi energy and geometrical parameters, a high quality factor can be attained in the resonance frequency that can provide the sensing possibility through the wavelength interrogation method. The results demonstrate that the proposed sensor can detect the chemicals with spectral shifts of 10 pm for steps of 5 charge carriers which is equal to a resolution smaller than 0.1ppm . Compared with other types of chemical graphene-based sensors employing optical fibers and plasmonic Fabry-Perot cavity, high resolution and sensitivity as well as the very simple geometry of the proposed sensing structure make it a promising candidate for ultra-sensitive chemical and biochemical detection.
Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Yang Li,Huitao Ban,Mujie Yang

DOI: https://doi.org/10.1016/j.snb.2015.10.078

IF: 9.221

2016-01-01

Sensors and Actuators B Chemical

Abstract:Nanocomposites of SnO2 nanosheets and polypyrrole (PPy) were facilely prepared and their gas sensing properties towards low concentration of NH3 have been investigated at room temperature. Vertically aligned SnO2 nanosheets were in situ grown on the substrates via hydrothermal treatment of electrospun nanofibers containing SnCl2 precursors at a low temperature (135 degrees C), and coated with PPy by vapor phase polymerization of pyrrole. The SnO2 nanosheets and the nanocomposites were characterized by X-ray diffraction patterns, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and high resolution transmission microscopy. The nanocomposite sensors exhibited much higher response magnitude towards NH3 than the sensors based on PPy alone. The effect of the type of doping acids and polymerization time of pyrrole on the sensing properties of the nanocomposites was examined. The nanocomposite sensors revealed sensitive (sensitivity of 6.2%/ppm in the range of 1-10.7 ppm of NH3, detection limit of similar to 257 ppb), selective and repeatable response to NH3, and the sensing mechanism has been explored. This work could provide references for the facile preparation of advanced gas sensors based on in situ grown nanostructured metal-oxide semiconductors and their composites. (C) 2015 Elsevier B.V. All rights reserved.
In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Huijie Zhao,Lijie Hong,Kaiyue Han,Mujie Yang,Yang Li

DOI: https://doi.org/10.1515/polyeng-2022-0106

IF: 1.624

2022-01-01

Journal of Polymer Engineering

Abstract:NH3 gas sensors with good sensing performance including wide detection range at room temperature are highly desirable for a large variety of applications. In this work, multi-walled carbon nanotubes grafted with sodium polystyrenesulfonate (PSSNa-MWCNTs) are prepared via a controlled radical polymerization and show good dispersibility in water. The composite of polypyrrole with PSSNa-MWCNTs (PPy/PSSNa-MWCNT) is prepared by in situ vapor phase polymerization of pyrrole to fabricate NH3 gas sensors. Effects of the content of PSSNa-MWCNTs, the concentration of the oxidant, polymerization time and temperature on the gas sensing properties of the composite are investigated at room temperature. It is revealed that the composite shows much higher response magnitude than the single components. Under optimal conditions, PPy/PSSNa-MWCNT exhibits very wide detection range from 5 to 2000 ppm, and good sensing linearity over 5-20 ppm and 20-100 ppm, respectively. Moreover, the electrical responses of the composite towards NH3 gas are fast (response and recovery time to 1000 ppm NH3 gas are 16.7 s and 143.6 s, respectively), reproducible and highly selective. The interactions between PPy and MWCNTs promote the charge transfer in the composite, leading to good sensing performance and exhibiting a synergetic effect.
High sensitive gas sensor based on vertical graphene field effect transistor

Hang Song,Jie Liu,Haiyang Lu,Chao Chen,Long Ba

DOI: https://doi.org/10.1088/1361-6528/ab668a

IF: 3.5

2020-04-17

Nanotechnology

Abstract:A gas sensor made from graphene vertical field effect transistor (VGr-FET) has been fabricated using graphene as the source electrode, C60 thin film as the semiconductor layer and aluminum thin film as the drain electrode. The on/off ratio of transistor gated by bottom electrode with ionic liquid gel as dielectric layer is derived to be 103 from measured source-drain current I ds. The apparent energy barrier height between the graphene and polycrystalline fullerene was calculated from the model of heterojunction diode I-V response curves. The barrier height φ BH was altered by the gating potential vertically applied on graphene sheet, resulting the large on/off ratio of the transistor. The effect of surface adsorption of water vapor, oxygen, ammonia and isoprene gas phase molecules on the I ds was measured. The lower limit of detection (LOD) for ammonia (86 ppb) than that of isoprene (420 ppb) is attributed to the donor nature of ammonia contact with p-type graphene, and the adsorbed donor leads to a corresponding positive gating effect to the VGr-FET. This facile, low cost and quick responsive device shows promise for early diagnose of severe human respiratory diseases.
Highly Sensitive and Selective Gas Sensor Using Hydrophilic and Hydrophobic Graphenes

Surajit Some,Yang Xu,Youngmin Kim,Yeoheung Yoon,Hongyi Qin,Atul Kulkarni,Taesung Kim,Hyoyoung Lee

DOI: https://doi.org/10.1038/srep01868

IF: 4.6

2013-01-01

Scientific Reports

Abstract:New hydrophilic 2D graphene oxide (GO) nanosheets with various oxygen functional groups were employed to maintain high sensitivity in highly unfavorable environments (extremely high humidity, strong acidic or basic). Novel one-headed polymer optical fiber sensor arrays using hydrophilic GO and hydrophobic reduced graphene oxide (rGO) were carefully designed, leading to the selective sensing of volatile organic gases for the first time. The two physically different surfaces of GO and rGO could provide the sensing ability to distinguish between tetrahydrofuran (THF) and dichloromethane (MC), respectively, which is the most challenging issue in the area of gas sensors. The eco-friendly physical properties of GO allowed for faster sensing and higher sensitivity when compared to previous results for rGO even under extreme environments of over 90% humidity, making it the best choice for an environmentally friendly gas sensor.
Tin oxide/graphene composite fabricated via a hydrothermal method for gas sensors working at room temperature

Qianqian Lin,Yang Li.,Mujie Yang

DOI: https://doi.org/10.1016/j.snb.2012.06.055

2012-01-01

Abstract:SnO2/graphene (GN) composite was fabricated via a simple one-pot hydrothermal method with graphene oxide (GO) and SnCl2 as the precursors. The composite was characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction patterns, scanning electron microscopy and high resolution transmittance electron microscopy. It exhibited 3D nanostructure in which flower-like microspheres consisting of SnO2 nanoflakes distributed among GN layers decorated with tiny SnO2 nanoparticles, and was featured with high surface area (94.9m2/g). GO is supposed to act as a template in the hydrothermal process, promoting the preferential growth of SnO2 nanocrystals and preventing the agglomeration of SnO2 nanoparticles. NH3 sensing characteristics of the composite at room temperature were investigated, and found to closely relate to its composition and structure. Under optimal conditions, the composite displayed high response magnitude (15.9% for 50ppm NH3), fast response (response and recovery time<1min), good reversibility and repeatability. Moreover, it exhibited small temperature coefficients in the range of 15–45°C. The ability of detecting gas at good room temperature of the composite is proposed to relate to its high specific surface, good conductivity of GN and interactions between GN and SnO2.
Three-dimensional graphene and its composite for gas sensors

Meng Hao,Wen Zeng,Yan-Qiong Li,Zhong-Chang Wang

DOI: https://doi.org/10.1007/s12598-020-01633-9

IF: 6.318

2021-01-18

Rare Metals

Abstract:As a two-dimensional (2D) material, graphene shows excellent advantages in the field of gas sensors due to its inherent large specific surface area and unique electrical properties. However, in the practical application of gas detection, graphene sheet is easy to form irreversible agglomeration and has some limitations such as low sensitivity, long response time and slow recovery speed, which greatly reduce its gas sensing performance. As a gas sensing material, three-dimensional (3D) porous graphene has been extensively studied in recent years owing to its larger specific surface area and stable structure. In order to synthesize graphene with different three-dimensional structures, many methods have been developed. Herein, the synthesis and assembly of three-dimensional graphene and its composites were reviewed, with emphasis on the application of three-dimensional graphene and its composites in the field of gas sensors. The challenges and development prospects of three-dimensional graphene materials in the application of gas sensors were briefly described.<h3 class="a-plus-plus">Graphic abstract</h3>

materials science, multidisciplinary,metallurgy & metallurgical engineering
A Facile Way to Improve the Sensing Performance of CVD Graphene

Haiyang Wu,Ningmei Yu,Weihua Liu

DOI: https://doi.org/10.1109/jsen.2024.3355493

IF: 4.3

2024-03-15

IEEE Sensors Journal

Abstract:The self-closed bonds limit the molecular adsorption on graphene, which in turn leads to low sensitivity of the gas sensors. In this article, a gas sensor based on surface-oxidized chemical vapor deposited (CVD) graphene is presented for ammonia (NH3) gas sensing. Oxygen functional groups are introduced in graphene through the in situ UV-ozone (UVO) treatment, which is considered to be convenient, low cost, and compatible with large-scale preparation. The NH3 with concentration ranging from 50 to 500 ppm has been tested to evaluate the sensing performance of the proposed gas sensors. The results show that sensor treated for 4 min exhibits the best response to NH3 which is over four times than that of pristine graphene. More importantly, the sensing response increases linearly from 8.93% to 43.11% under 500-ppm NH3 as UVO treatment time increase in the range from 0 to 4 min, whereas the gas response decreased to 28.15% after exposure time is up to 8 min. This may be because surface oxidation dominates during short-term UVO exposure, but destructive etching dominates during a long-term exposure. In addition, the response speed of UVO-treated gas sensor is much faster than that of pristine graphene, whereas no significant change is observed in the recovery process. The proposed gas sensor also exhibits good selectivity, while there is a slight degradation of 5% in long-term stability after 18 days. The proposed facile method may provide reference value for the improvement of surface modification and gas sensing properties of other two-dimensional (2-D) materials.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Au-decorated Porous Structure Graphene with Enhanced Sensing Performance for Low-Concentration NO 2 Detection

Yan-Yan Fan,Hai-Ling Tu,Yu Pang,Feng Wei,Hong-Bin Zhao,Yi Yang,Tian-Ling Ren

DOI: https://doi.org/10.1007/s12598-020-01397-2

IF: 6.318

2020-01-01

Rare Metals

Abstract:A recent progress in new emerging two-dimensional（2 D） materials has provided promising opportunity for gas sensing in ultra-low detectable concentration.In this work,we have demonstrated a flexible NO 2 gas sensor with porous structure graphene on polyethylene terephthalate substrates operating at room temperature.The gas sensor exhibited good performance with response of 1.2%and a fast response time within 30 s after exposure to50 × 10 -9 NO 2 gas.As porous structure of graphene increased the surface area,the sensor showed high sensitivity of ppb level for NO 2 detection.Au nanoparticles were decorated on the surface of the porous structure graphene skeleton,resulting in an incensement of response compared with pristine graphene.Au nanoparticles-decorated graphene exhibits not only better sensitivity（1.5-1.6 times larger than pristine graphene） for NO 2 gas detection,but also fast response.The sensor was found to be robust and sensitive under the cycling bending test,which could also be ascribed to the merits of graphene.This porous structure graphene-based gas sensor is expected to enable a simple and inexpensive flexible gas sensing platform.
Phosphomolybdic Acid-Decorated Carbon Nanotubes for Low-Power Sensing of NH 3 and NO 2 at Room Temperature

Yu Zhu,Changsheng Chen,Shuo Wu,Runhong Cheng,Junxiong Gao,Yan Yu,Wenli Zhou

DOI: https://doi.org/10.1021/acsanm.0c03333

IF: 6.14

2021-02-16

ACS Applied Nano Materials

Abstract:Low-dimensional materials such as carbon nanotubes (CNTs) are promising candidates for gas sensing. Surface modification with specific molecules is considered an effective approach to enhance gas sensing. In this work, a kind of carbon hybrid is fabricated with phosphomolybdic acid (PMA) molecule-decorated single-walled CNTs (SWNTs) as a gas-sensing element and chemical vapor deposition-grown graphical graphene on prepatterned copper and nickel films as composite electrodes. According to the experimental results of NH3 and NO2 detection, the PMA-decorated carbon hybrids present much higher sensitivity, faster response, and lower power consumption than other previously reported oxide-modified CNT gas sensors. Responses of the DC resistance variation of approximately 23 or −21% to 5 ppm NH3 or NO2 are demonstrated at room temperature, with a power consumption of only hundreds of nanowatts (nWs). The enhanced gas sensitivity of the carbon hybrid is described by the first-principles calculation of the energy band and Schottky barrier in hybrid structures from the interface perspective. A significant change in Fermi level in SWNTs due to PMA decoration reduces the Schottky barrier at the SWNT/graphene interface and allows the hybrid to function at an appropriate status, which corresponds to a high response to the redox reaction between PMA and NO2 or NH3 molecules.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c03333?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c03333</a>.SEM images and Raman spectra of pristine SWNT; layout and optical microscopy images of graphene/CuNi composite electrodes; CVD process of graphene growth; AFM image and EDS analysis result of d-CNT in carbon hybrid; photograph of gas sensing experimental setup; SEM images of d-CNT hybrids with different initial resistances and their gas sensing response; first-principles calculation models of d-CNT; and calculated changes in charge density and Fermi level of d-CNT due to the gas molecule adsorption (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c03333/suppl_file/an0c03333_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Highly sensitive and portable gas sensing system based on reduced graphene oxide

Wen-Tian Mi,Shih-Wen Chiu,Tao Xue,Yuan-Quan Chen,Han-Yu Qi,Yi Yang,Kea-Tiong Tang,Tian-Ling Ren

DOI: https://doi.org/10.1109/TST.2016.7536721

2016-01-01

Abstract:Graphene has been widely used in gas-sensing applications due to its large specific surface area and strong adsorption ability. Among different forms of graphene used as gas-sensing materials, reduced graphene oxide is one of the most convenient and economical materials to integrate with Si-based electronics, which is very important to graphene-based gas sensors. In addition, the stacking structure of graphene oxide flakes facilitates absorption and detection of gas molecules. Based on reduced graphene oxide, a highly sensitive and portable gas-sensing system was demonstrated here. Solution-based graphene oxide was cast on a chip like a TF memory card and then reduced thermally. A signal acquisition system was designed to monitor resistance variation as a sign of gas concentration. This miniature graphene-based gas sensor array demonstrates a new path for the use of graphene in gas-detection technologies. And the creation of a sensitive and portable graphene gas sensor also shows great potential in fields such as medicine and environmental science.
Detection of Individual Gas Molecules Absorbed on Graphene

F. Schedin,A. K. Geim,S. V. Morozov,D. Jiang,E. H. Hill,P. Blake,K. S. Novoselov

DOI: https://doi.org/10.1038/nmat1967

2007-08-20

Abstract:The ultimate aspiration of any detection method is to achieve such a level of sensitivity that individual quanta of a measured value can be resolved. In the case of chemical sensors, the quantum is one atom or molecule. Such resolution has so far been beyond the reach of any detection technique, including solid-state gas sensors hailed for their exceptional sensitivity. The fundamental reason limiting the resolution of such sensors is fluctuations due to thermal motion of charges and defects which lead to intrinsic noise exceeding the sought-after signal from individual molecules, usually by many orders of magnitude. Here we show that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphenes surface. The adsorbed molecules change the local carrier concentration in graphene one by one electron, which leads to step-like changes in resistance. The achieved sensitivity is due to the fact that graphene is an exceptionally low-noise material electronically, which makes it a promising candidate not only for chemical detectors but also for other applications where local probes sensitive to external charge, magnetic field or mechanical strain are required.

Materials Science,Mesoscale and Nanoscale Physics
Selective Sensing and Mechanism of Patterned Graphene-Based Sensors: Experiments and DFT Calculations

Xiaohui Ye,Ming Qi,Houyong Yang,Francis Sona Mediko,Hao Qiang,Yanling Yang,Chaozheng He

DOI: https://doi.org/10.1016/j.ces.2021.117017

IF: 4.7

2022-01-01

Chemical Engineering Science

Abstract:Graphene with antidots shows great potential in wearable devices and highly sensitive sensors. In this paper, we fabricated the patterned graphenes of circle, square, and triangle by ultrafast laser processing. The given patterned graphene can precisely detect one specific gas from the CO/NO/H2O-mixed gases. The sensing performance results demonstrated that the circle patterned graphene (cir-graphene) was most sensitive to CO with the highest sensitivity with the gauge factor (GF) of 3.9 x 10(4). For NO sensing, the triangle patterned graphene (tri-graphene) conducted the best results. The square patterned graphene (squ-graphene) was the most sensitive to H2O. The DFT calculations revealed that CO was chemical adsorbed on cir-graphene with the most negative adsorption energy (-3.638 eV). For NO sensing, tri-graphene performed best. While, the patterned graphene was not available to H2O sensing. This work offers a novel solution to next-generation wearable multifunctional sensors, and a new insight for the selective sensing mechanism. (C) 2021 Elsevier Ltd. All rights reserved.
Graphene-Based Fiber Materials for Gas Sensing Applications: State of the Art Review

Susanna Vu,Mohamed Siaj,Ricardo Izquierdo

DOI: https://doi.org/10.3390/ma17235825

IF: 3.4

2024-11-28

Materials

Abstract:The importance of gas sensors is apparent as the detection of gases and pollutants is crucial for environmental monitoring and human safety. Gas sensing devices also hold the potential for medical applications as health monitoring and disease diagnostic tools. Gas sensors fabricated from graphene-based fibers present a promising advancement in the field of sensing technology due to their enhanced sensitivity and selectivity. The diverse chemical and mechanical properties of graphene-based fibers—such as high surface area, flexibility, and structural stability—establish them as ideal gas-sensing materials. Most significantly, graphene fibers can be readily tuned to detect a wide range of gases, making them highly versatile in gas-sensing technologies. This review focuses on graphene-based composite fibers for gas sensors, with an emphasis on the preparation processes used to achieve these fibers and the gas sensing mechanisms involved in their sensors. Graphene fiber gas sensors are presented based on the chemical composition of their target gases, with detailed discussions on their sensitivity and performance. This review reveals that graphene-based fibers can be prepared through various methods and can be effectively integrated into gas-sensing devices for a diverse range of applications. By presenting an overview of developments in this field over the past decade, this review highlights the potential of graphene-based fiber sensors and their prospective integration into future technologies.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Pure and doped graphene as a suitable material for the detection of hazardous gases

Rahadian Zainul,Abdulrahman T. Ahmed,Mandeep Kaur,Rohit Sharma,Luma Hussain Saleh,Ali Al-Mahmood,Devendra Pratap Rao,Mohd Abul Hasan,Saiful Islam

DOI: https://doi.org/10.1016/j.jorganchem.2024.123196

IF: 2.345

2024-05-23

Journal of Organometallic Chemistry

Abstract:The need for highly sensitive toxic gas sensors is significant, and achieving this sensitivity is possible. Researchers have utilized density functional theory (DFT) computations to examine adsorption of different gas molecules (COX 2 , where X is F, Cl, or Br) over Au-doped and pristine graphene. This investigation aims to determine possibility of employing Au-doped graphene as a basis for gas sensors. Multiple adsorption positions and orientations were examined for each gas molecule. The configuration that exhibited the highest stability was identified, and adsorption energy (E ads ) values, considering van der Waals (vdW) interactions, have been computed using NCI analyses. In addition, the electronic properties, including LUMO-HOMO orbital density and charge transfer, were analyzed to acquire a deeper understanding of process by which adsorption occurs. Findings indicated that gas molecules under investigation exhibited weak adsorption on pristine graphene, with low E ads values. In contrast, E ads values of every gas molecule on Au-doped graphene displayed varying degrees of increase. Notably, COX 2 exhibited a high sensitivity to Au-doped graphene. Furthermore, in the effect of doping Au into graphene, the E ads absorption of COCl 2 gas has increased from 0.155 to 1.028 eV. This indicates the strong tendency of Au-doped graphene to interact with gas COCl 2 compared to two other COX 2 gas species. This strong adsorption can be ascribed to significant substantial charge transfer (CT) between COCl 2 and Au-doped graphene and orbital hybridization. The charge transfer amount of the doped states has increased by more than double compared to the pure state. The band gap of Au-doped graphene has decreased from 2.14 to 1.83 eV due to the absorption of gas COCl 2 , indicating the highest amount of reduction compared to other gases. Moreover, the enhanced electrical conductivity of Au-doped graphene renders it more valuable and sensitive in the context of sensing COX 2 gases.

chemistry, inorganic & nuclear, organic
Ammonia Gas Sensor Based on Graphene Oxide-Coated Mach-Zehnder Interferometer with Hybrid Fiber Structure

Xiaofeng Fan,Shuying Deng,Zhongchao Wei,Faqiang Wang,Chunhua Tan,Hongyun Meng

DOI: https://doi.org/10.3390/s21113886

IF: 3.9

2021-06-04

Sensors

Abstract:A graphene oxide-coated in-fiber Mach-Zehnder interferometer (MZI) formed with a multimode fiber-thin core fiber-multimode fiber (MMF-TCF-MMF) is proposed and experimentally demonstrated for ammonia gas (NH3) sensing. The MZI structure is composed of two segments of MMF of length 2 mm, with a flame-tapered TCF between them as the sensing arm. The MMFs act as mode couplers to split and recombine light owing to the core diameter mismatch with the other fibers. A tapered TCF is formed by the flame melting taper method, resulting in evanescent wave leakage. A layer of graphene oxide (GO) is applied to the tapered region of the TCF to achieve gas adsorption. The sensor operates on the principle of changing the effective refractive index of the cladding mode of a fiber through changing the conductivity of the GO coating by adsorbed NH3 molecules, which gives rise to a phase shift and shows as the resonant dip shifts in the transmission spectrum. So the concentration of the ammonia gas can be obtained by measuring the dip shift. A wavelength-shift sensitivity of 4.97 pm/ppm with a linear fit coefficient of 98.9% is achieved for ammonia gas concentrations in the range of 0 to 151 ppm. In addition, we performed a repetitive dynamic response test on the sensor by charging/releasing NH3 at concentration of 200 ppm and a relative humidity test in a relative humidity range of 35% to 70%, which demonstrates the reusability and stability of the sensor.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
An investigation of the pharmacological response to vitamin K1 in the rabbit

M. J. Winn,S. Cholerton,B. K. Park

DOI: https://doi.org/10.1111/j.1476-5381.1988.tb11625.x

IF: 7.3

1988-08-01

British Journal of Pharmacology

Abstract:1 The relationship between pharmacological response and disposition of a dose of vitamin K1 (10 mg kg−1, i.v.) in normal rabbits and in rabbits treated with the coumarin anticoagulant brodifacoum, has been studied. 2 High performance liquid chromatography (h.p.l.c.) with electrochemical detection (EC) was used to determine concentrations of vitamin K1 in plasma, whole liver homogenate, and liver microsomes. 3 After intravenous administration of vitamin plasma concentrations of the vitamin declined in a tri‐exponential fashion. There were no differences between the two groups over the first 24 h of the experiment. However, between 24 h and the end of the study, plasma concentrations of vitamin K1 in the presence of brodifacoum were significantly (P ≤ 0.05) below those of vehicle‐treated rabbits. 4 Seventy‐two hours after administration of vitamin K1, plasma concentrations of the vitamin were not different from normal. 5 Three hours after administration of vitamin K1, the concentrations of the vitamin in whole liver were 46.6 ± 4.3 μg g−1 in the presence of brodifacoum, and 32.8 ± 6.4 μg g−1 in the absence of brodifacoum; and were significantly (P ≤ 0.05) greater than normal (127.7 μ 44.3 ng g−1). Likewise, microsomal concentrations of vitamin K1 (4.00 ± 2.38 μg mg−1 protein, and 2.65 ± 1.01 μg mg−1 protein, in the presence and absence of brodifacoum, respectively) were significantly (P ≤ 0.01) greater than normal (16.0 ± 3.5 ng mg−1 protein). 6 In conclusion, there appears to be no direct effect of coumarins on clearance of vitamin K1 from either plasma or liver; the need for large doses of vitamin K1 during coumarin poisoning is due to a greatly increased requirement for the vitamin.
Assembly of 2D-Mos2 with Graphene Layer for Highly Sensitive and Selective Gas Detection at Room Temperature

Xuemei Liu,Zehui He,Shiyuan Xu,Jiaying Wu,Jianmin Wu

DOI: https://doi.org/10.1016/j.snb.2022.132185

2022-01-01

SSRN Electronic Journal

Abstract:Two-dimensional (2D) graphene has been regarded as a promising gas sensing material operated in room temperature. However, practical use of pure graphene as a gas sensor still faces problems owing to its insufficient sensitivity, selectivity and stability. In the present study, 2D-molybdenum disulfide (2D-MoS2) were successfully assembled with graphene oxide (GO) with the assistance of poly (diallyl dimethylammonium chloride) (PDDA). The intercalation of PDDA and stacking of 2D-MoS2 significantly expand the interlayer spacing of GO from 0.77 nm to 1.44 nm in the GO-PDDA-MoS2 composite. The rGO-PDDA-MoS2 sensing chip could be obtained by in-situ reduction of GO-PDDA-MoS2 pre-coated on an interdigital electrode in hydrazine vapor. The sensor exhibited excellent sensitivity, selectivity and stability for H2S and NO detection with a limit detection as low as 3 ppb and 5 ppb, respectively. The enhanced sensing performance could be ascribed to the increased gas accessibility and specific binding site resulted from the introduction of PDDA and 2D-MoS2. Furthermore, its potential application in the diagnosis of respiratory disease was demonstrated. Exhaled breath (EB) spiked with 50 ppb NO and 15 ppb H2S for simulating EB of asthma patients could be successfully discriminated from the normal EB.
An effective formaldehyde gas sensor based on oxygen-rich three-dimensional graphene

Shu Zhang,Jinbo Pang,Yufen Li,Bergoi Ibarlucea,Yu Liu,Ting Wang,Xiaoyan Liu,Songang Peng,Thomas Gemming,Qilin Cheng,Hong Liu,Jiali Yang,Gianaurelio Cuniberti,Weijia Zhou,Mark H Rümmeli

DOI: https://doi.org/10.1088/1361-6528/ac4eb4

IF: 3.5

2022-02-10

Nanotechnology

Abstract:Abstract Three-dimensional (3D) graphene with a high specific surface area and excellent electrical conductivity holds extraordinary potential for molecular gas sensing. Gas molecules adsorbed onto graphene serve as electron donors, leading to an increase in conductivity. However, several challenges remain for 3D graphene-based gas sensors, such as slow response and long recovery time. Therefore, research interest remains in the promotion of the sensitivity of molecular gas detection. In this study, we fabricate oxygen plasma-treated 3D graphene for the high-performance gas sensing of formaldehyde. We synthesize large-area, high-quality, 3D graphene over Ni foam by chemical vapor deposition and obtain freestanding 3D graphene foam after Ni etching. We compare three types of strategies—non-treatment, oxygen plasma, and etching in HNO 3 solution—for the posttreatment of 3D graphene. Eventually, the strategy for oxygen plasma-treated 3D graphene exceeds expectations, which may highlight the general gas sensing based on chemiresistors.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

Highly Sensitive Chemical Gas Sensor Based on Graphene Deposited D-shaped-fiber

High Sensitive Reduced Graphene Oxide-Based Room Temperature Ionic Liquid Electrochemical Gas Sensor with Carbon-Gold Nanocomposites Amplification

Ultra-Sensitive Absorption-Based Gas Detecting Using Graphene-Covered Periodic Photonic Crystal Slabs Resonating Under Critical Coupling Condition at Mid-Infrared Frequencies

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

High sensitive gas sensor based on vertical graphene field effect transistor

Highly Sensitive and Selective Gas Sensor Using Hydrophilic and Hydrophobic Graphenes

Tin oxide/graphene composite fabricated via a hydrothermal method for gas sensors working at room temperature

Three-dimensional graphene and its composite for gas sensors

A Facile Way to Improve the Sensing Performance of CVD Graphene

Au-decorated Porous Structure Graphene with Enhanced Sensing Performance for Low-Concentration NO 2 Detection

Phosphomolybdic Acid-Decorated Carbon Nanotubes for Low-Power Sensing of NH 3 and NO 2 at Room Temperature

Highly sensitive and portable gas sensing system based on reduced graphene oxide

Detection of Individual Gas Molecules Absorbed on Graphene

Selective Sensing and Mechanism of Patterned Graphene-Based Sensors: Experiments and DFT Calculations

Graphene-Based Fiber Materials for Gas Sensing Applications: State of the Art Review

Pure and doped graphene as a suitable material for the detection of hazardous gases

Ammonia Gas Sensor Based on Graphene Oxide-Coated Mach-Zehnder Interferometer with Hybrid Fiber Structure

An investigation of the pharmacological response to vitamin K1 in the rabbit

Assembly of 2D-Mos2 with Graphene Layer for Highly Sensitive and Selective Gas Detection at Room Temperature

An effective formaldehyde gas sensor based on oxygen-rich three-dimensional graphene