Abstract:Molybdenum disulfide (MoS2), as a promising gas-sensing material, has gained intense interest because of its large surface-to-volume ratio, air stability, and various active sites for functionalization. However, MoS2-based gas sensors still suffer from low sensitivity, slow response, and weak recovery at room temperature, especially for NO2. Fabrication of heterostructures may be an effective way to modulate the intrinsic electronic properties of MoS2 nanosheets (NSs), thereby achieving high sensitivity and excellent recovery properties. In this work, we design a novel p-n hetero-nanostructure on MoS2 NSs using interface engineering via a simple wet chemical method. After surface modification with zinc oxide nanoparticles (ZnO NPs), the MoS2/ZnO hetero-nanostructure is endowed with an excellent response (5 ppm nitrogen dioxide, 3050%), which is 11 times greater than that of pure MoS2 NSs. To the best of our knowledge, such a response value is much higher than the response values reported for MoS2 gas sensors. Moreover, the fabricated hetero-nanostructure also improves recoverability to more than 90%, which is rare for room-temperature gas sensors. Our optimal sensor also possesses the characteristics of an ultrafast response time of 40 s, a reliable long-term stability within 10 weeks, an excellent selectivity, and a low detection concentration of 50 ppb. The enhanced sensing performances of the MoS2/ZnO hetero-nanostructure can be ascribed to unique 2D/0D hetero-nanostructures, synergistic effects, and p-n heterojunctions between ZnO NPs and MoS2 NSs. Such achievements of MoS2/ZnO hetero-nanostructure sensors imply that it is possible to use this novel nanostructure in ultrasensitive sensor applications.

Assembly of 2D-Mos2 with Graphene Layer for Highly Sensitive and Selective Gas Detection at Room Temperature

In Situ Synthesis of Polyoxometalate-Derived MoS2/phosphomolybdic Acid Composites for Highly Sensitive NO2 Detection

Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

Rgo Doped Mofs-Derived Cuo Nanocomposites As Flexible Room-Temperature Sensors for Ppb-Level H2s Detection

SnO2-inserted 2D Layered Ti3C2Tx MXene: from Heterostructure Construction to Ultra-High Sensitivity for Ppb-level H2S Detection

Construction of MoS2/SnO2 Heterostructures for Sensitive NO2 Detection at Room Temperature

High Surface Area MoS2/Graphene Hybrid Aerogel for Ultrasensitive NO2Detection

MoS2 Nanosheets Sensitized with Quantum Dots for Room-Temperature Gas Sensors

Two-Dimensional MoS2 for Resonant-Gravimetric Detection of Ppb-Level Formaldehyde.

Aniline Oligomer-Assisted Exfoliation of MoS2 Nanosheets for High-Performance Room-Temperature NO2 Gas Sensing

Three-Dimensional MoS2/Reduced Graphene Oxide Nanosheets/Graphene Quantum Dots Hybrids for High-Performance Room-Temperature NO2 Gas Sensors

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

P-N Heterojunction formation: Metal Sulfide@Metal Oxide Chemiresistor for ppb H 2 S Detection from Exhaled Breath and Food Spoilage at Flexible Room Temperature

Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Rational Synthesis of Molybdenum Disulfide Nanoparticles Decorated Reduced Graphene Oxide Hybrids and Their Application for High-Performance NO2 Sensing

MoS2 Graphene Fiber Based Gas Sensing Devices

Design of Hetero-Nanostructures on MoS 2 Nanosheets To Boost NO 2 Room-Temperature Sensing.

3D-Multilayer MoS2 Nanosheets Vertically Grown on Highly Mesoporous Cubic In2O3 for High-Performance Gas Sensing at Room Temperature

Flexible, 3D SnS2/Reduced Graphene Oxide Heterostructured NO2 Sensor

2H-Mos2/ti3c2tx MXene Composites for Enhanced NO2 Gas Sensing Properties at Room Temperature

Two-dimensional MoSe2 Nanosheets Via Liquid-Phase Exfoliation for High-Performance Room Temperature NO2 Gas Sensors