Abstract:Introducing electric current into metals and alloys to improve their ductility and to reduce the hardening tendency has been widely adopted. Nevertheless, how the electricity affects the plastic deformation of those materials remains a critical issue with controversial opinions. To clarify the material plastic deformation subjected to electric current, or the so-called electroplastic behavior, an in-depth understanding of the dislocation evolution during that process is vital. From that motivation, three-dimensional dislocation dynamics simulations were carried out to explore the dislocation behavior during the uniaxial tensile deformation of pure aluminum with the introduction of electric current. The scattering process between electrons and dislocations was first captured by a physical model. The electron wind force and local heat effect were quantitatively analyzed by figuring out the momentum and the energy transferred during the interaction of electrons and dislocations respectively. The dislocation density evolution, the activation of different slip systems and the dislocation distribution were further analyzed based on the simulations. The dislocation density in the [111] direction is revealed to increase more significantly than [101] and [001] directions with the introduction of electric current. The results show that the current can reduce the flow stress by promoting the activation of the difficult-to-move dislocations. The activation effect reduces the dislocation tangling tendency and leads to more uniform dislocation distribution. Therefore, a reduction of the flow stress can be observed in EAT comparing to TAT, via the discrete dislocation dynamics simulations even though the dislocation densities are similar. The simulation results are also confirmed by the EAT and TAT experiment results and TEM observations.

Reversion of Sub-Boundaries into Dense Dislocations in Aluminum by Electric Pulsing Treatment

Non-Octahedral-Like Dislocation Glides in Aluminum Induced by Athermal Effect of Electric Pulse

G031052 Annihilation of Dislocation by Controlling High Density Electric Current Field in Fatigued Stainless Steel

Rapid Anisotropy Recovery in Deformed FCC Metals by High-Density Pulsed Electric Current Treatment

The Effect of Electric Current on Dislocation Activity in Pure Aluminum: A 3D Discrete Dislocation Dynamics Study

Unveiling Thermal and Athermal Effects in Strain Hardening Removal of A6061 Aluminum Alloy

Dislocation Reconfiguration During Creep Deformation of an Al-Cu-Li Alloy Via Electropulsing

Defect reconfiguration in a Ti–Al alloy via electroplasticity

In-situ Study of the Effect of Strain Path Change on Dislocation Boundary Evolution in Commercial Purity Aluminum

Electroplasticity mechanism study based on dislocation behavior of Al6061 in tensile process

Achieving High-Strength Ductility Property in a Microstructure Homogenization Al-Zn-Mg-Cu Alloy by Electroshock Treatment

In-situ EBSD Study of the Active Slip Systems and Lattice Rotation Behavior of Surface Grains in Aluminum Alloy During Tensile Deformation

Electropulsing treatment-induced the enhanced recrystallization of deformed Al 0.1 CoCrFeNi high-entropy alloy at lower temperature

Micron-scale 1D migration of interstitial-type dislocation loops in aluminum

Anomalous Response to Creep Deformation from Dislocation Density During Electrically Assisted Creep Aging

Enhanced Electroplasticity through Room-Temperature Dynamic Recrystallization in a Mg-3Al-1Sn-1Zn Alloy

Thermal and Electromigration Effects of Electropulsing on Dynamic Recrystallization in Mg–3Al–1Zn Alloy

A novel electromagnetic shock treatment to selectively modify grain boundary and improve the corrosion resistance of aluminium alloy

Insights into Electron Wind Force by a Helical Dislocation Reconfiguration

In-Situ Observations of Migration of Recrystallization Boundaries in Pure Aluminium

Accumulation and Annihilation Effects of Electropulsing on Dynamic Recrystallization in Magnesium Alloy