Abstract:On-chip nonvolatile photonic switches enabled by phase change materials (PCMs) are promising building blocks for power-efficient programmable photonic integrated circuits. However, large absorption loss in conventional PCMs (such as Ge2Sb2Te5) interacting with weak evanescent waves in silicon waveguides usually leads to high insertion loss and a large device footprint. In this paper, we propose a 2×2 photonic switch based on two-mode interference in a multimode slot waveguide (MSW) with ultralow loss Sb2S3 integrated inside the slot region. The MSW supports two lowest order TE modes, i.e., symmetric TE00 and antisymmetric TE01 modes, and the phase of Sb2S3 could actively tune two-mode interference behavior. Owing to the enhanced electric field in the slot, the interaction strength between modal field and Sb2S3 could be boosted, and a photonic switch containing a ∼9.4 µm-long Sb2S3-MSW hybrid section could effectively alter the light transmission between bar and cross ports upon the phase change of Sb2S3 with a cross talk (CT) less than -13.6 dB and an insertion loss (IL) less than 0.26 dB in the telecommunication C-band. Especially at 1550 nm, the CT in the amorphous (crystalline) Sb2S3 is -36.1 dB (-31.1 dB) with a corresponding IL of 0.073 dB (0.055 dB). The proposed 2×2 photonic switch is compact in size and compatible with on-chip microheaters, which may find promising applications in reconfigurable photonic devices.

Compact 2×2 Parabolic Multimode Interference Thermo–optic Switches Based on Fluorinated Photopolymer

Study of polymeric optical switches based on multimode interference coupler

Optical switch based on multimode interference coupler

Compact All-Optical Switches Based on Photon-Induced Suppression of Mode Interference

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Compact waveguide devices based on multimode interference by using area modulation method

Polymer Thermo-Optic Switches with Y-Branch

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

A Multimode Interference Polymer-Silica Hybrid Waveguide 2x2 Thermo-Optic Switch

Compact Asymmetric 1 × 2 Multimode Interference Optical Switch

Compact Nonvolatile 2×2 Photonic Switch Based on Two-Mode Interference

Low Crosstalk Y-branch 1×2 Thermo-Optic Digital Optical Switch

A Novel 2 X 3 Optical Switch Utilizing Total Internal Reflection Based On Thermo-Optical Effect Of Polymer

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

High-performance Silicon PIN Diode Switches in the 2-Μm Wave Band.

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement