Abstract:Polishing SiC is a difficult task due to its exceptional chemical stability and high hardness. While the strong catalytic performance resulting from the coupling effect of ultrasonic vibration and catalysis is well-known, there have been limited studies on its effectiveness for SiC chemical mechanical polishing. To address this gap, we present a novel approach that utilizes the coupling of ultrasonic vibration and catalysis for SiC polishing. The hydroxyl free radical (*OH) generated by coupling effect is analyzed using ultraviolet-visible spectrophotometry (UV–VIS) to screen for a catalyst that matches ultrasonic vibration and establish a high-performance catalytic coupling system. The use of ultrasonic vibration in SiC polishing results in a significant increase in catalytic efficiency, with a doubling effect observed. Additionally, the catalyst itself increases ultrasonic efficiency by 43.1 %, leading to a substantial improvement in material removal rate ( MRR ). We study the impact of the placement of the ultrasonic vibration device on MRR and evaluate the performance of the coupling system used for polishing. Also, we delved into the removal mechanism of SiC by utilizing XPS and nyquist plots. Our findings reveal a maximum MRR of 214.6 nm/h, which improves the efficiency of commercial slurry by 80.0 %. Furthermore, the proposed strategy increases the MRR of commercial slurry by more than 70 % in the time range of 0–1 h, 1–2 h, and 0–2 h. The surface roughness ( Ra ) measured by AFM using a scanning area of 1 × 1 μm 2 at sub-angstrom scale ( Ra =0.0627 nm) is achieved. This study significantly improves the polishing efficiency of commercial slurry and has great application prospects.

Novel polystyrene/CeO2-TiO2 multicomponent core/shell abrasives for high-efficiency and high-quality photocatalytic-assisted chemical mechanical polishing of reaction-bonded silicon carbide

Photocatalytic assisted chemical mechanical polishing for silicon carbide using developed ceria coated diamond core-shell abrasives

Material Removal Rate of 4H-Sic Polishing with Polystyrene/CeO2Core/shell Abrasives

Novel photoelectrochemically combined mechanical polishing technology for scratch-free 4H-SiC surface by using CeO2-TiO2 composite photocatalysts and PS/CeO2 core/shell abrasives

Controllable Synthesis of Core-Shell Sio2@Ceo2 Abrasives for Chemical Mechanical Polishing on Sio2 Film

Trivalent lanthanum and ytterbium doped meso-silica/ceria abrasive systems toward chemical mechanical polishing (CMP) and ultraviolet irradiation-assisted photochemical mechanical polishing (PCMP)

Photocatalysis-Assisted Chemical Mechanical Polishing of SiC Wafer Using a Novel SiO2@TiO2 Core-Shell Composite Nanoparticles Slurry

Polystyrene/CeO2 Core/Shell Abrasives for High-Quality 4H-Sic Surface in ECMP: the Effects of Shell Thickness

Development of Core–shell SiO2@A-TiO2 Abrasives and Novel Photocatalytic Chemical Machinal Polishing for Atomic Surface of Fused Silica

Investigation on Electrical Enhanced Photocatalysis Polishing of Single-Crystal Silicon Carbide Substrates

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Simple and Facile Synthesis of Single-Crystal CeO2 Abrasives and Its Highly Efficient Removal Mechanism on SiO2 Film

Development and Characterization of a Novel RE3+ Doped Core-shell CeO2 Abrasive System and Its Glass CMP Investigations

Chemical mechanical polishing of silicon carbide (SiC) based on coupling effect of ultrasonic vibration and catalysis

Atomic Surface on Fused Silica Induced by Novel Green Photochemical Mechanical Polishing

Improved Chemical Mechanical Polishing Performance in 4H-Sic Substrate by Combining Novel Mixed Abrasive Slurry and Photocatalytic Effect

Mechanism of chemical and mechanical mutual promotion in photocatalysis-assisted chemical mechanical polishing for single-crystal SiC

Polishing behavior of PS/SiO<sub>2</sub> Core-Shell nanoparticles with different shell thickness on fused silica Chemical Mechanical Polishing

Copper Chemical Mechanical Polishing Performances of Polystyrene/Ceria Hybrid Abrasives with a Core/Shell Structure

Core–shell structured polystyrene coated silica composite abrasives with homogeneous shells: The effects of polishing pressure and particle size on oxide-CMP

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing