Abstract:Crack sizes, geometrical configurations of specimens and structures, as well as loading conditions have significant effect on in-plane and out-of-plane constraint effects. Safety assessment with constraint effects can effectively improve the accuracy. There are prominent discrepancies between compressive fracture and tensile fracture. Most of engineering structures are usually under biaxial loading conditions, so that the influence of biaxial compressive loading on fracture analysis with constraint effects is worth paying attention. The size effect factor (relative crack length a/W, thickness to width ratio t/W and crack inclination angle β) and load factor (lateral pressure coefficient λ) of central cracked plate (CCP) specimens with I-II mixed mode crack on constraint effects under biaxial compressive loading have been investigated through theoretical analysis and finite element analysis. In-plane non-singular T-stress (T 11) and its components (T x, T y, and T xy), out-of-plane non-singular T-stress (T 33), out-of-plane constraint parameter T z and stress triaxiality factor h have been adopted to quantify constraint effects. It demonstrates that λ has remarkable influence on SIF, T 11 and T 33 under biaxial compressive loading. The effect of higher a/W (long cracks) on B 11 is more noticeable when I-II mixed mode crack is closer to pure mode II crack or pure mode I crack. The proportion of shear fracture increases under biaxial compression with λ. With the increase of β, B 33 decreases sharply and then increases rapidly with higher λ. T z can directly reflect stress states and adequately describe the loss of out-of-plane constraint. The stress state of crack tip is more likely to asymptotic plane-strain condition ahead of crack tip under compression. There are crucial differences in variation range and tendency of T z subjected to biaxial tensile and biaxial compressive loading. Moreover, T z is insensitive to λ. Stress triaxiality factor h can illustrate in-plane and out-of-plane constraint effects including size effect and load factor (sensitive to a/W, t/W, β and λ), especially can be adopted as a unified constraint parameter for long cracks under biaxial compressive loading. The in-plane T-stress components can be directly calculated by T 11 under biaxial compression. The empirical equations of K II and T 11 containing size effect and load factor simultaneously are effective and convenient for applications.

Fundamental problem in optimizing the biaxial testing specimen

An attempt to design a universal specimen for any multiaxial loading conditions

Biaxial Tension Test of Soft Materials

Study of Ligament Length Effect on Mode Mix of a Modified In-Plane Shear Test Specimen

TOPOLOGICAL OPTIMIZATION OF THE TEST SPECIMEN FOR BIAXIAL TENSION

Biaxial Testing of Thin Metal Sheets under Non-Proportional Loading Conditions

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Design of a biaxial tensile testing device and cruciform specimens for large plastic deformation in the central zone

An Investigation of Testing Methods on the Biaxial Mechanical Behaviors of Anisotropic Materials

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

An Investigation of How Specimen Dimensions Affect Biaxial Mechanical Characterizations with Cellscale BioTester and Constitutive Modeling of Porcine Tricuspid Valve Leaflets

An efficient and accurate framework to determine the failure surface/envelop in composite lamina

Biaxial Extension of Cruciform Specimens: Embedding Equilibrium Into Design and Constitutive Characterization

A Novel Biaxial Testing Apparatus for the Determination of Forming Limit under Hot Stamping Conditions

Investigation on in-plane and out-of-plane constraint effects for plates with I-II mixed mode cracks under biaxial compressive loading

Study on biaxial tensile failure behavior of ultra-thin-ply carbon fiber reinforced composites

A novel method for imitating true-triaxial stress path with conventional triaxial apparatus

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles