Abstract:The Taylor-Couette reactor (TCR) is becoming an increasingly significant topic in chemical industry. This study investigates the micromixing performance of a ribbed TCR with axial flow in the Villermaux-Dushman reaction system. The local micromixing mechanism of the ribbed TCR was analyzed, and the volume-averaged energy dissipation rate was calculated using CFD. The effects of operating parameters and rib structural parameters on micromixing performance were investigated. The results show that the introduction of ribs eliminates the high shear region between the vortex pairs, resulting in the strong micromixing region being situated on the inner and outer cylinder wall surfaces and the ribbed surface region. Smaller rib spacing, larger rib width, and rib height can strengthen micromixing and result in a smaller segregation index. Micromixing times of ribbed TCRs were calculated using the incorporation model, t(m), in the range of 2.0 x 10(-5) to 8.0 x 10(-3). The results show that ribbed TCRs require a lower energy consumption to achieve a lower t(m) than other rotating reactors. A correlation equation between t(m) and five parameters was developed, with a correlation coefficient of 0.951. The accuracy of the volume-averaged energy dissipation rate obtained via CFD was verified through experimental analysis. The correlation between the micromixing time and the volume-averaged energy dissipation rate was established in a form that satisfies Kolmogorov's turbulence theory for t(m). To convert the volume-averaged energy dissipation rate into a local energy dissipation rate, a factor & phi; was introduced and solved using the engulfing diffusion model. This study provides insights into the design and optimization of ribbed TCRs.

Numerical and Experimental Investigations of Micromixing Performance and Efficiency in a Pore-Array Intensified Tube-in-tube Microchannel Reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Experimental and CFD Studies on the Intensified Micromixing Performance of Micro-Impinging Stream Reactors Built from Commercial T-junctions

Mixing Behavior and Mass Transfer of Liquid–liquid Two-Phase Flow in an Annular Microchannel with Helical Wires

Numerical investigation of mixing performance for a helical tangential porous tube-in-tube microchannel reactor

Micromixing Performance and Residence Time Distribution in a Miniaturized Magnetic Reactor: Experimental Investigation and Machine Learning Modeling

Mixing Performance in T-shape Microchannel at High Flow Rate for Villermaux-Dushman Reaction

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Micromixing Performance in a Taylor-Couette Reactor with Ribbed Rotors

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Characterization and modeling of micromixing performance in micropore dispersion reactors

Mixing Performance of an Inline High-Shear Mixer with a Novel Pore-Array Liquid Distributor

Flow and Mixing in a Tube-in-tube Millireactor with Multiholes Jet and Twist Tapes

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

A study on the micromixing performance in microreactors for polymer solutions

Numerical and Experimental Investigation on a "Tai Chi"-Shaped Planar Passive Micromixer

Gas Absorption and Mass Transfer in a Pore-Array Intensified Tube-in-Tube Microchannel

Micromixing Performance of a Miniaturized Annular Rotating Flow Mixer (MARFM)

Micromixing Intensification Within a Combination of T-Type Micromixer and Micropacked Bed

Intensification of liquid-liquid two-phase mass transfer in a capillary microreactor system

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor