Abstract:Heat management poses severe constraints when designing non-adiabatic multi-tubular packed-bed reactors for strongly exothermic or endothermic catalytic processes. The exploitation of conduction in the solid matrix of engineered continuous internals (e.g., honeycomb monoliths, open-cell foams, periodic open-cell structures) as a heat transfer mechanism alternative, or possibly additional, to fluid-phase convection, is a promising strategy to relax some of these constraints, offering new opportunities for the intensification of catalytic reactors. Preliminary experimental data and modelling studies show that this is particularly true for compact-scale applications, when conductive internals are packed with catalyst micro-pellets. In this work, through pilot-scale testing, we show that overall heat transfer coefficients as high as 1300 W/m 2 /K can be achieved in periodic open-cell structures (POCS) made of a highly conductive aluminium alloy, 3D printed with an external continuous skin and packed with 300–400 μm catalyst micro-pellets. To this aim, a Fischer-Tropsch experimental campaign has been carried out in a pilot-scale rig, using an established 20 wt% Co/Al 2 O 3 catalyst formulation and a tubular reactor (28.80 mm I.D., 20 cm catalyst bed length) externally cooled with an isothermal diathermic oil. Thanks to the outstanding heat transfer properties of the packed-POCS reactor, by progressively increasing the oil temperature from 180 °C to 225 °C, once-through CO conversions as high as 70 % have been measured at gas hourly space velocities exceeding 4000 cm 3 (STP)/h/g cat , resulting in C 5 + yields in excess of 0.35 g/h/g cat , with a CH 4 selectivity always below 15 %. Such performances, made possible by the intensified heat management granted by the adopted reactor internals, are among the best ever reported for a compact-scale Fischer-Tropsch tubular reactor.

Gas Absorption and Mass Transfer in a Pore-Array Intensified Tube-in-Tube Microchannel

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Using in-line static mixers to intensify gas–liquid mass transfer processes

Remarkable improvement of gas–liquid mass transfer by modifying the structure of conventional T‐junction microchannel

Mass transfer performance of gas-liquid segmented flow in microchannels

Heat transfer intensification in compact tubular reactors with cellular internals: A pilot-scale assessment of highly conductive packed-POCS with skin applied to the Fischer-Tropsch synthesis

Experimental Study on Gas-Holdup and Gas-Liquid Interfacial Area in Tpcfbs

CFD modeling on the chemical absorption of CO2 in a microporous tube-in-tube microchannel reactor

A Ceramic Microfiltration Tube Membrane Dispersion Extractor

A convenient method for measuring gas-liquid volumetric mass transfer coefficient in micro reactors

Gas–Liquid Mass Transfer Characteristics in Two Inline High Shear Mixers

Fabrication, Characterization and Drainage Capacity of Single-Channel Porous Alumina Ceramic Membrane Tube

Numerical investigation of mixing performance for a helical tangential porous tube-in-tube microchannel reactor

Development of a membrane dispersion micro-absorber for CO 2 capture

Intensified CO2 Absorption in a Microchannel Reactor under Elevated Pressures

Feasibility of Temperature Swing Adsorption in Adsorbent-Coated Microchannels for Natural Gas Purification

Selective Absorption of H2S from a Gas Mixture with CO2 in a Microporous Tube-in-tube Microchannel Reactor

Hydrodynamics and Mass Transfer Performance of Gas–liquid Microflow in Viscous Liquids

Performance Study of Heat and Mass Transfer in an Adsorption Process by Numerical Simulation

Mixing Performance of an Inline High-Shear Mixer with a Novel Pore-Array Liquid Distributor

Direct Thermal Oxidative Cross-Linking in Air Toward Hierarchically Microporous Polymer Membranes for Advanced Molecular Sieving