Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

Micromixing Performance and Residence Time Distribution in a Miniaturized Magnetic Reactor: Experimental Investigation and Machine Learning Modeling

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Micromixing Performance of a Miniaturized Annular Rotating Flow Mixer (MARFM)

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Micromixing Intensification by Gas Introduction in a Miniaturized Annular Rotating Flow Mixer (MARFM)

Experimental Research On Mixing Efficiency Of Magnetic Micromixer

Micromixing Simulation of Novel Large-Double-Blade Impeller

Characterization and modeling of micromixing performance in micropore dispersion reactors

Micromixing within microfluidic devices: Fundamentals, design, and fabrication

The structure-effect relationship between inline high shear mixers and micromixing: Experiment and CFD simulation

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor

Residence time distribution analysis of magnetic nanoparticle-enhanced mixing using time-dependent magnetic actuation in microfluidic system

Insights into a T-type micromixer with novel electromagnetic mixing

Performance of microball micromixers using a programmable magnetic system by applying novel movement patterns

Magnetically Levitated Microrobotic Mixer

Reactive mixing performance for a nanoparticle precipitation in a swirling vortex flow reactor

Experiment Investigation of Enhancement Micromixing by Microbubble Actuators

Mixing Performance Analysis and Optimal Design of a Novel Passive Baffle Micromixer

A Three-Dimensional Micromixer Using Oblique Embedded Ridges