Abstract:Due to the extremely low Reynolds number, the mixing of substances in laminar flow within microfluidic channels primarily relies on slow intermolecular diffusion, whereas various rapid reaction and detection requirements in lab-on-a-chip applications often necessitate the efficient mixing of fluids within short distances. This paper presents a magnetic pillar-shaped particle fabrication device capable of producing particles with planar shapes, which are then utilized to achieve the rapid mixing of multiple fluids within microchannels. During the particle fabrication process, a degassed PDMS chip provides self-priming capabilities, drawing in a UV-curable adhesive-containing magnetic powder and distributing it into distinct microwell structures. Subsequently, an external magnetic field is applied, and the chip is exposed to UV light, enabling the mass production of particles with specific magnetic properties through photo-curing. Without the need for external pumping, this chip-based device can fabricate hundreds of magnetic particles in less than 10 min. In contrast to most particle fabrication methods, the degassed PDMS approach enables self-priming and precise dispensing, allowing for precise control over particle shape and size. The fabricated dual-layer magnetic particles, featuring fan-shaped blades and disk-like structures, are placed within micromixing channels. By manipulating the magnetic field, the particles are driven into motion, altering the flow patterns to achieve fluid mixing. Under conditions where the Reynolds number in the chip ranges from 0.1 to 0.9, the mixing index for substances in aqueous solutions exceeds 0.9. In addition, experimental analyses of mixing efficiency for fluids with different viscosities, including 25 wt% and 50 wt% glycerol, reveal mixing indices exceeding 0.85, demonstrating the broad applicability of micromixers based on the rapid rotation of magnetic particles.

Performance of microball micromixers using a programmable magnetic system by applying novel movement patterns

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Magnetically Levitated Microrobotic Mixer

Micromixing Strategies for Efficient Mixing Processes: A Comprehensive Review

Fabrication of Patterned Magnetic Particles in Microchannels and Their Application in Micromixers

Microfluidic mixing by magnetic particles: Progress and prospects

Numerical study of the performance of an active micromixer based on the oscillations of a microbeam

Experimental Research On Mixing Efficiency Of Magnetic Micromixer

A Directly Moldable, Highly Compact, and Easy-for-Integration 3D Micromixer with Extraordinary Mixing Performance

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Micromixing within microfluidic devices: Fundamentals, design, and fabrication

Introducing Novel Planar Micromixers with Pillars and Gaps and Studying the Impact of Various Geometric Parameters on the Efficiency of Micromixers

Micromixing Performance and Residence Time Distribution in a Miniaturized Magnetic Reactor: Experimental Investigation and Machine Learning Modeling

Experiment Investigation of Enhancement Micromixing by Microbubble Actuators

Enhanced Mixing Efficiency for a Novel 3D Tesla Micromixer for Newtonian and Non-Newtonian Fluids

Investigations of the mixing efficiency of five novel micromixer designs with backward arrow inlet using the Villermaux Dushman protocol

A compact and efficient three-dimensional microfluidic mixer

Insights into a T-type micromixer with novel electromagnetic mixing

Innovative 3D Microfluidic Tools for On-Chip Fluids and Particles Manipulation: From Design to Experimental Validation

Performance of a helical insert in a commercial tubing as a passive micromixer to produce nanoparticles using an emulsification approach

Experimental fluid dynamics characterization of a novel micropump-mixer