Effects of Water Leaching (simulated Rainfall) and Additives (KOH, KCl, and SiO2) on the Ash Fusion Characteristics of Corn Straw

Yanqing Niu,Yuan Lv,Xiao Zhang,Denghui Wang,Ping Li,Shi'en Hui

DOI: https://doi.org/10.1016/j.applthermaleng.2019.03.124

IF: 6.4

2019-01-01

Applied Thermal Engineering

Abstract:To solve the intractable slagging problem during biomass combustion, natural leaching by rainfall is an economy and effective post-harvest quality optimization method. The effects of simulated rainfall intensity and duration on the removals of ash, K and Cl, and consequently the ash fusion temperature (AFTs) of corn straw were studied. Meanwhile, the effects of KOH, KCl, and SiO2 additives were compared. Leaching reduced the formation of KCl and K2SO4 in biomass ash effectively and thus the formation of low-melting K2O center dot nSiO(2) (n = 1-4), whereas the relatively content of high-melting SiO2 increased, resulting in increased AFTs. Leaching intensity had stronger effects than leaching duration. There exists a critical leaching point at similar to 4 ml water consumption per gram biomass, after which continued leaching had less removal efficiencies. During the initial leaching stage (with a water consumption of 2-4 ml per gram biomass), less removal of Cl compared to K2O caused lower IDT and ST, but higher FT; consequently, the extended temperature difference deteriorates deposition formation. A raninfall/snow leaching influencing mechanism on biomass AFTs was illustrated. These results provide useful guidelines for choosing the appropriate time node of straw collection in field based on rainfall, and thus reducing slagging during biomass combustion.