Abstract:Solid polymer electrolytes are potential replacement of liquid electrolytes due to their much less flammability and leakage. Among them, poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-based electrolytes have several advantages including improved processability and electrochemical stability. Unfortunately, poor ionic conductivity and mechanical properties due to high plasticizer concentration hinder their practical applications. Herein, we address these issues by exploiting the solvation effect in the electrolyte through tuning the amount of residual N-methyl-2-pyrrolidone (NMP) and lithium salts. Moreover, by blending with porous carbon (PC) the mechanical integrity of the PVDF-HFP electrolytes is substantially enhanced due to improved interfacial bonding and specific surface area. The appropriate value of electrical conductivity and highly porous morphology of PC also meet the ionic transport and electronic insulation requirements. With the absorbed residual NMP as plasticizer and complexed with Li ions to formLi[NMP](3)(+) , ionic conductivity and amorphicity are improved. By elucidating the solvent and salt concentration interplay, Li-ion conductivity of up to 0.56 mS cm(-,) wide electrochemical window of 5 V versus Li/Li+ and 1000 h of cycling stability (versus Li, 0.2 mA/cm(2)) are obtained. These findings afford a novel electrolyte design guideline for enhancing interfacial compatibility and cycling through hybridization and ion solvation to develop practical lithium batteries.

Preparation and performance of p(OPal-MMA)/PVDF blend polymer membrane via phase-inversion process for lithium-ion batteries

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Preparation and Characterization of PVDF/P（MMA-co-DMAEMA） Separators for Lithium Battery

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Preparation of PVDF Based Blend Microporous Membranes for Lithium Ion Batteries by Thermally Induced Phase Separation: I. Effect of PMMA on the Membrane Formation Process and the Properties

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

Blending-based Poly(vinylidene Fluoride)/polymethyl Methacrylate Membrane for Rechargeable Lithium-Ion Batteries

Preparation of Pvdf/Pmma Blend Microporous Membranes for Lithium Ion Batteries Via Thermally Induced Phase Separation Process

A Novel PVB Based Polymer Membrane and Its Application in Gel Polymer Electrolytes for Lithium-Ion Batteries

Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: Preparation and property of PVDF/poly(dimethylsiloxane) blending membrane

Preparation of a Microporous Polymer Electrolyte Based on Poly(vinyl Chloride)/poly(acrylonitrile-Butyl Acrylate) Blend for Li-ion Batteries

Pvdf/Pan/Sio2 Polymer Electrolyte Membrane Prepared by Combination of Phase Inversion and Chemical Reaction Method for Lithium Ion Batteries

Study of PVDF-HFP/PMMA Blended Micro-Porous Gel Polymer Electrolyte Incorporating Ionic Liquid [BMIM]BF4 for Lithium Ion Batteries

Blending Based Polyacrylonitrile/poly(vinyl Alcohol) Membrane for Rechargeable Lithium Ion Batteries

Study of poly (organic palygorskite-methyl methacrylate)/poly(vinylidene fluoride-co-hexafluoropropylene) blended gel polymer electrolyte for lithium-ion batteries

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process

Enhanced Mechanical Strength And Conductivity Of Pvfm Based Membrane And Its Supporting Polymer Electrolytes