Abstract:The increasing utilization of CO2 for synthesizing high-value fuels or essential chemicals is a potentially effective approach to mitigating global warming and climate change. Compared to thermal catalytic CO2 conversion under harsh operating conditions (400∼500°C, 10 MPa), non-thermal plasma can overcome kinetic barriers and trigger reactions beyond thermal equilibrium at ambient temperature and pressure. In this study, the effects of operating conditions (discharge frequency, input power, and gas flow rate) and geometrical parameters (discharge length, discharge gap, and dielectric materials) have been extensively analyzed using typical cylindrical dielectric barrier discharge (DBD) plasma. The discharge characteristics changed by operating conditions (including waveforms of applied voltage and current) are compared, indicating higher applied voltage and lower gas flow rate can strengthen the filamentary discharges. The results demonstrate CO2 conversion rate increases with the increase of applied voltage and the decrease of CO2/H2 ratio, achieving its maximum value of 43.0% at 20 mL/min. The highest energy efficiency of 3771.9 μg/kJ for CO generation is obtained at the applied voltage of 5.5 kV and gas flow rate of 40 mL/min, respectively. Besides, the structure of plasma reactor also impacts the performance of CO2 conversion. On the one hand, the discharge gap has a significant role in the variation of CO2 conversion and product selectivity, which is attributed to the electric field density and corresponding electron-induced reaction. On the other hand, the circulating water-cooling jacket was used to find out the influence of reaction temperature, which switched the product from CO to CH4. This work will pave the way for a sustainable alternative towards future CO2 conversion and utilization.

Effect of plasma on catalytic conversion of CO2 with hydrogen over Pd/ZnO in a dielectric barrier discharge reactor

Plasma-Catalytic CO2 Hydrogenation over a Pd/ZnO Catalyst: in Situ Probing of Gas-Phase and Surface Reactions

Synergistic Effect of Catalyst and Plasma on CO2 Decomposition in a Dielectric Barrier Discharge Plasma Reactor

Dielectric Barrier Discharge Plasma-Assisted Catalytic CO2 Hydrogenation: Synergy of Catalyst and Plasma

Reverse water-gas shift in a packed bed DBD reactor: Investigation of metal-support interface towards a better understanding of plasma catalysis

Mechanism of plasma chemistry in CO2 hydrogenation using a dielectric barrier discharge reactor

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Enhanced Effect of Plasma on Catalytic Reduction of CO 2 to CO with Hydrogen over Au/CeO 2 at Low Temperature

CO2 hydrogenation to lower hydrocarbons over ZSM-5-supported catalysts in a dielectric-barrier discharge plasma reactor

Plasma-Catalytic Conversion of CO2 and H2O into H2, CO, and Traces of CH4 over NiO/Cordierite Catalysts

Conversion of Carbon Dioxide to Carbon Monoxide by Pulse Dielectric Barrier Discharge Plasma

CO2 conversion in non-thermal plasma and plasma/g-C3N4 catalyst hybrid processes

The Plasma Enhanced Surface Reactions in a Packed Bed Dielectric Barrier Discharge Reactor

CO2 Conversion in a Coaxial Dielectric Barrier Discharge Plasma Reactor in the Presence of Mixed ZrO2-CeO2

Enhanced CO2 hydrogenation to light hydrocarbons on Ni-based catalyst by DBD plasma

Numerical Study on the Reaction Mechanism of CO2 Hydrogenation in Atmospheric-Pressure Dielectric Barrier Discharge

CO2 Conversion Promoted by Potassium Intercalated G-C3n4 Catalyst in DBD Plasma System

Plasma Catalysis-Driven Decomposition of CO2: Optimizing Energy Distribution with NiCo-CuO Catalyst

Selective catalytic reduction of NO<sub>x</sub> in dielectric barrier discharge plasmas

Dielectric Barrier Discharge Plasma Assisted CO2 Conversion: Understanding the Effects of Reactor Design and Operating Parameters

Plasma Assisted Catalytic Conversion of CO2 and H2O Over Ni/Al2O3 in a DBD Reactor