Abstract:An inverse Pd-Zr model catalyst was prepared by chemical vapor deposition (CVD) using zirconium-t-butoxide (ZTB) as an organometallic precursor. Pd-Zr interaction was then investigated with focus on the correlation of reforming performance with the oxidation state of Zr. As test reactions, dry reforming of methane (DRM) and methanol steam reforming (MSR) were chosen. Depending on treatments, either ZrOxHy or ZrO2 overlayers or Zr as sub-nanometer clusters could be obtained. Following the adsorption of ZTB on Pd(111), a partially hydroxylated Zr4+-containing layer was formed, which can be reduced to metallic Zr by thermal annealing in ultrahigh vacuum, leading to redox-active Zr0 sub-nanometer clusters. Complementary density functional theoretical (DFT) calculations showed that a single layer of ZrO2 on Pd(111) can be more easily reduced toward the metallic state than a double- and triple layer. Also, the initial and resulting layer compositions greatly depend on gas environment. The lower the water background partial pressure, the faster and more complete the reduction of Zr4+ species to Zr0 on Pd takes place. Under methanol steam reforming conditions, water activation by hydroxylation of Zr occurs. In excess of methanol, strong coking is induced by the Pd/ZrOxHy interface. In contrast, dry reforming of methane is effectively promoted if these initially metallic Zr species are present in the pre-catalyst, leading to a Pd/ZrOxHy phase boundary by oxidative activation under reaction conditions. These reaction-induced active sites for DRM are stable with respect to carbon blocking or coking. In essence, Zr doping of Pd opens specific CO2 activation channels, which are absent on pure metallic Pd.

Reverse water-gas shift in a packed bed DBD reactor: Investigation of metal-support interface towards a better understanding of plasma catalysis

Dynamic Formation Of Pd Delta+-Fe2+ Interface Promoting Reverse Water Gas Shift Reaction Over Pd/Feox Catalyst

Effect of Pd loading on ZrO2 support resulting from pyrolysis of UiO-66: Application to CO oxidation

Recent Advances in Supported Metal Catalysts and Oxide Catalysts for the Reverse Water-Gas Shift Reaction

Optimizing reverse water gas shift catalysis: Minimizing metal loading and enhancing performance with Pt/ZrO 2 catalysts through Rh incorporation

Synergistic effect between In2O3 and ZrO2 in the reverse water gas shift reaction

Cu and Cu-Fe Bi-Metal Nanoparticles Encapsulated in Hollow S-1 Zeolite for Reverse Water Gas Shift Reaction

Efficient Zr-MCM-41 supported nickel phyllosilicate catalyst for the plasma-involved dry reforming of CH 4 and CO 2

Boosted reverse water-gas shift activity via exsolved Cu and Ni in silicalite-1

Support-Dependent Cu–In Bimetallic Catalysts for Tailoring the Activity of Reverse Water Gas Shift Reaction

The Critical Role of βPdZn Alloy in Pd/ZnO Catalysts for the Hydrogenation of Carbon Dioxide to Methanol

Strain-assisted in-situ formed oxygen defective WO3 film for photothermal-synergistic reverse water gas shift reaction and single-particle study

Pt‐Mo2N Catalyst Formed by Inverse Sintering for the Reverse Water‐Gas Shift Reaction

Synergism of Ultrasmall Pt Clusters and Basic La2O2CO3 Supports Boosts the Reverse Water Gas Reaction Efficiency

Preparation of heterostructured Cu-CeO 2 /SrTiO 3 catalysts by rapid plasma exsolution for photothermal reverse water gas shift reaction

The significant role of oxygen vacancy in Cu/ZrO2 catalyst for enhancing water–gas-shift performance

Steam Effects over Pd/Ce0.67Zr0.33O2-Al2O3 Three-Way Catalyst

Chemical vapor deposition-prepared sub-nanometer Zr clusters on Pd surfaces: promotion of methane dry reforming

Cu/CeO2 catalysts for reverse water gas shift reactions: the effect of the preparation method

Identification of Relevant Active Sites and A Mechanism Study for Reverse Water Gas Shift Reaction over Pt/Ceo2 Catalysts

Novel Insights on the Metal-Support Interactions of Pd/ZrO2 Catalysts on CH4 Oxidation