Abstract:In this work, we investigate the driving-cycle-based ammonia coverage ratio reference optimization for diesel engine two-can selective catalytic reduction systems. The ammonia coverage ratio references are the desired profiles of the ammonia coverage ratios. As these desired profiles can be set as the references for the feedback controls, it is important to obtain their optimal values. The model development and system parameter identification for these two catalyst cans are carried out by considering the main chemical reactions inside the catalyst cans and using the experimental data from the US06 test driving cycle. The main advantage of the two-can setup is twofold: the first catalyst can is mainly used to reduce the nitrogen oxides; the second catalyst can is used to adsorb the ammonia emitted from the first can such that the nitrogen oxides are reduced and the undesired ammonia slip is constrained. For high nitrogen oxide conversion, it is intuitively required that the ammonia coverage ratio for the first catalyst can is as high as possible. However, a high ammonia coverage ratio increases the ammonia slip downstream. In order to constrain the ammonia slip downstream, it is expected that the ammonia coverage ratio for the second catalyst can is as low as possible. However, the lower ammonia coverage ratio may not help nitrogen oxide reduction in the second can. Because of the conflict in the ammonia coverage ratios for these two catalyst cans, it is quite interesting and meaningful to study the optimal ammonia coverage ratios. With the developed system models, we propose a nonlinear model predictive control approach to solve the optimization problem. Various cases are studied to investigate the effect of the initial value on the ammonia coverage ratios. Compared with the existing results, the obtained ammonia injection profile which decides the ammonia coverage ratios can achieve much better control performance with respect to the tailpipe nitrogen oxide reduction and ammonia slip.

Simultaneous Optimization of Urea Dosing and Ammonia Coverage Ratio of Selective Catalytic Reduction System in Diesel Engine by Using Physico-Chemical Model Based NSGA-II Algorithm

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Zonal Control for Selective Catalytic Reduction System Using a Model-Based Multi-Objective Genetic Algorithm

Model-Based Closed-Loop Control Strategy of Diesel Urea-SCR System Simulation

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Numerical Simulation to Reduce NOx of Diesel Engine Urea-SCR System

Nonlinear Model Predictive Control of Integrated Diesel Engine and Selective Catalytic Reduction System for Simultaneous Fuel Economy Improvement and Emissions Reduction

Cycle-based Optimal Emission Control of Diesel Engine Selective Catalyst Reduction Systems

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Application of NMPC on optimization of ammonia coverage ratio references in two-can diesel SCR systems

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Simulation Study of Ammonia Storage Characteristics of Selective Catalytic Reduction for Diesel Engines

Optimization of the ammonia coverage ratio references in diesel engine two-can selective catalytic reduction systems via nonlinear model predictive control

Cycle-based Ammonia-Coverage-ratio Reference Generator Design for Diesel Engine Two-Cell Selective Catalytic Reduction Systems Via a Fuzzy Approach

Model-based NH3 Adaptation Method for SCR Control

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Influence of Urea-SCR System Parameters on NOx Conversion Rate and Liquid Film

Review on Selective Catalytic Reduction Technology of Diesel Engines