Abstract:A series of nanofibrous alumina materials with diameters of 4-6 nm and with different aspect ratios ranging from 3 to 16 were prepared. Cobalt impregnated catalysts were prepared by means of incipient wetness impregnation on alumina nanofibers while the 'rearranged' catalysts were prepared by using ultrasonication assistance to mix the fibers with the Co3O4 nanoparticles. The effects of the alumina nanofiber aspect ratios on the Co catalyst structure and performance for Fischer-Tropsch synthesis were studied. The pore size of the two series of catalysts increased as the aspect ratio of the alumina nanofiber increased. For impregnated catalysts, large Co3O4 particles were formed on the external surface of the alumina support when the aspect ratio was 3 and 5, while the crystallite sizes of Co3O4 increased from 13.3 nm to 15.6 nm with the increase of the aspect ratio from 7 to 16. The four 'rearranged' catalysts possessed similar and homogeneously dispersed Co3O4 crystallites of 9.5 nm. As expected the reduction behavior of the two series of catalysts was primarily influenced by the Co3O4 crystallite size and structure. The FT data of the two series of catalysts indicate that dispersed Co catalysts on alumina nanofibers with large aspect ratios having large inter-crystallite pores significantly improve the catalyst activity and C5+ selectivity. The FT data of the 'rearranged' catalysts strongly demonstrated that the internal mass transfer of reactants and products increased with a decrease in inter-crystallite pore size, resulting in a decrease of C5+ selectivity and C3 olefin/paraffin ratio, and an increase of CH4 selectively, while the CO consumption rate was little altered. Furthermore, catalytic stability tests showed that the alumina nanofibers with larger aspect ratios inhibited Co migration and coalescence in the matrices of the nanofibrous alumina, and this significantly enhanced the stability of the catalyst. The Cop/Al2O3-16 catalyst possessing uniformly distributed cobalt, improved reducibility and large pores is the preferred choice to generate high catalytic activity, stability and C5+ selectivity.

Construction of three-dimensional nitrogen-doped graphene aerogel (NGA) supported cobalt catalysts for Fischer-Tropsch synthesis

Cobalt-based N-doped Bamboo-Like Graphene Tubes with Enhanced Durability for Efficient Oxygen Reduction Reaction in Direct Borohydride Fuel Cell

Enhancing the Stability of a Cobalt-Based Fischer–Tropsch Synthesis Catalyst Using G-C3n4-coated SBA-15 As Support

Boosting the Fischer-Tropsch Synthesis Performances of Cobalt-Based Catalysts Via Geometric and Electronic Engineering: Construction of Hollow Structures

One-pot hydrothermal preparation of B and N co-doped graphene aerogels loaded with cobalt oxides for the synergistic enhancement of oxygen reduction electrocatalysis

Fischer‐Tropsch Synthesis by a Cobalt‐Based Carbon Aerogel Catalyst

Fischer–Tropsch synthesis using a cobalt catalyst supported on graphitic carbon nitride

Performance of Nitrogen-Containing Macroporous Carbon Supported Cobalt Catalyst Synthesized Through In-Situ Construction of Catalytic Sites for Oxygen Reduction Reaction

Fischer–Tropsch Synthesis: ZIF-8@ZIF-67-Derived Cobalt Nanoparticle-Embedded Nanocage Catalysts

Construction of Synergistic Fe5C2/Co Heterostructured Nanoparticles As an Enhanced Low Temperature Fischer–Tropsch Synthesis Catalyst

Fischer–Tropsch Synthesis: Higher Oxygenate Selectivity of Cobalt Catalysts Supported on Hydrothermal Carbons

Carburized cobalt catalyst for the Fischer–Tropsch synthesis

The Effect of the Nanofibrous Al2O3 Aspect Ratio on Fischer-Tropsch Synthesis over Cobalt Catalysts.

Cobalt Nanoparticle-Decorated LDH/ZIF-Derived Porous Nanoplatelets for Fischer–Tropsch Synthesis

Design and Construction of Size-Controlled CoO/CS Catalysts for Fischer-Tropsch Synthesis

Uniformity Dispersive, Anti-Coking Core@double-Shell-structured Co@SiO2@C: Effect of Graphitic Carbon Modified Interior Pore-Walls on C5+ Selectivity in Fischer-Tropsch Synthesis

Aqueous-phase Fischer-Tropsch synthesis catalyzed by cobalt nanoparticles

Three-Dimensional Nitrogen-Doped Graphene Aerogel-Supported MnO Nanoparticles As Efficient Electrocatalysts for CO2 Reduction to CO

Bimetal–Organic Framework-Derived CoMn@C Catalysts for Fischer–Tropsch Synthesis

Tuning Active Sites on Cobalt/nitrogen Doped Graphene for Electrocatalytic Hydrogen and Oxygen Evolution

Co-Based Catalysts Supported on Silica and Carbon Materials: Effect of Support Property on Cobalt Species and Fischer–Tropsch Synthesis Performance